User manual

17ENGLISH
7. WHAT TO DO IF...
Before calling for service, review this list. It may save you time and expense. This list
includes common occurrences that are not the result of defective workmanship or
materials in this appliance.
Occurrence Possible Cause Solution
Dehumidier does
not operate
Wall plug
disconnected.
Push plug rmly into wall outlet.
House fuse blown
or circuit breaker
tripped.
Replace fuse with time delay typeor
reset circuit breaker.
The dryness level
you selected has
been reached.
Dehumidier automatically shuts off
when selected amount of moisture
has been removed from the air. If you
want to remove more moisture, enter
in Continuous operation. After the
dehumidier starts, reset the control
panel to the desired setting.
Water Tank not
installed properly.
See “5.15 Removing Collected Water”.
Water in the water
tank has reached its
preset level.
Dehumidier automatically turns off when
this occurs. Empty water tank and return
it to position.
Dehumidier is not
turned on.
Turn unit on.
The programme
/ cycle lasts too
long.
Windows or doors
near dehumidier
are open to
outdoors.
Close all windows or doors to outside.
Area to be
dehumidied is too
large.
Check with your dealer to see if capacity
is adequate.
Air movement
through dehumidier
is blocked. Grill may
be dirty.
Use brush attachment of vacuum cleaner
to clean grill. See “6. Care, Cleaning and
Storage”. Dehumidier must be placed in
a space that does not restrict air owing
into the air intake or outlet.
Dehumidier has
been installed or
restarted recently.
The higher the moisture in the room, the
longer the dehumidier will operate.
Dehumidier is in
the Continuous
operation and will
remain on in this
mode.
Exit this operation.