User manual

16 www.electrolux.com
4.
Clean the Mesh Pre-lter
The mesh pre-lter is put together with
the lter lid at the back of the appliance,
it should be checked and cleaned at
least every 30 days or more often if
necessary.
NOTE: DO NOT PUT THE FILTER IN
A DISHWASHER.
a.
Open the lter lid and you will nd
the mesh pre-lter is put behind the
back of the lid.
b.
Take out the mesh pre-lter from the
assembly.
c.
Clean the mesh pre-lter with warm,
soapy water. Rinse and dry it by
airing before putting it back.
d.
Reinstall the lter, then put the lter lid
back.
CAUTION!
DO NOT operate the appliance
without a lter because dirt and lint
will clog inside the appliance, which
will affect the performance..
6.2
Replace the HEPA particle
lter
See section "5.12 Filter Change Indicator"
for the details when and how to replace
the HEPA particle lter.
NOTE:
• Be different from the mesh pre-lter, the
HEPA particle lter can not be washed,
it can only be replaced.
Please visit electrolux.com to order your
replacement lter.
6.3
Storage
If you are not going to use the appliance
for a long time, please store it properly.
1.
Unplug the appliance, then tidy up the
power cord using the tag at the back of
the unit.
2.
Empty the water tank and clean the
mesh pre-lter.
3.
Dry the appliance and all accessories by
airing.
4.
Pack it with plastic bag or return it to its
carton then place the unit in a cool and
dry place.