User manual

Problem Possible solution
The appliance door does not close. Make sure that the installation of the filter
is correct.
Make sure that the laundry does not catch
between the appliance door and the rub-
ber seal.
The appliance stops during operation. Make sure that the water container is emp-
ty. Press Start/Pause to start the pro-
gramme again.
The display shows a long programme du-
ration.
1)
Make sure that the weight of the laundry is
applicable to the duration of the pro-
gramme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Make sure that the room temperature is
not too warm.
The display shows a short programme du-
ration.
Set the Time Drying or the Extra Dry pro-
gramme.
The display shows Err. If you want to set a new programme, de-
activate and activate the appliance.
Make sure that the options are applicable
to the programme.
The display shows (e.g. E51). Deactivate and activate the appliance.
Start a new programme. If the problem oc-
curs again, contact the Service.
1)
After maximum 5 hours, the programme ends automatically
If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The condenser is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor.
• The airflow slots are clogged.
13. TECHNICAL DATA
Height x Width x Depth 850 x 600 x 580 mm (maximal 640 mm)
Max. depth with the appliance door open 1090 mm
Max. width with the appliance door open 950 mm
ENGLISH
31