Installation Instructions

15
36” DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
Wall and floor attachment
Positioning the bracket using the template:
1. Choose the correct side of the template, based
on the model.
2. Fold the template following the horizontal dashed
line.
3. Place the template so that the thick vertical line
drawn on it is aligned with the edge of the left
side of the appliance.
4. Mark the location of the screw holes, to wall or to
floor depending of how you want to fix the
bracket.
5. Fix the anti-tip bracket.
WARNING
Electrical shock hazard
• Use extreme caution when
drilling holes in the wall or
floor. There may be con-
cealed electrical wiring
behind the wall or under the
floor.
• Identify the location of the
electrical circuits that could be
affected by the installation of
the anti-tip device, then turn
off power to these circuits.
• Failure to follow these instruc-
tions may result in electrical
shock or other personal injury.
CAUTION
• Contact a qualified installer or
contractor to determine the
proper method for drilling
holes through the wall or floor
material (such as ceramic tile,
hardwood, etc.)
• Failure to follow these instruc-
tions may result in damage to
wall or floor coverings.
WARNING
Visually check from the inside
of the drawer that the wall/floor-
mounted bracket is inserted
into the appropriate lateral hook
(left side).