User manual

4. OPERATION
4.1 Control panel
21 3
2
3
4
5
6
7
1
0
1
Temperature regulator
2
Power indicator light
3
High temperature alarm light
B
C
A
20
3
4
5
6
7
1
A. Temperature Regulator
B. Half Loaded position
C. Full Loaded position
4.2 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature Regulator to
the Full Loaded position and let the
appliance run for 24 hours to allow
the correct temperature to be
reached before placing food inside.
The power indicator light will light up.
3. Adjust the Temperature Regulator
according to the quantity of the
stored foods.
4.3 Switching off
Turn the Temperature regulator to the "0"
position.
4.4 Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
• to obtain a lower temperature inside
the appliance, turn the Temperature
Regulator clockwise.
• to obtain a higher temperature inside
the appliance, turn the Temperature
Regulator counterclockwise .
In case of freezing less food
volumes, the Half Loaded
setting is the most suitable.
In case of freezing large
amounts of food, the Full
Loaded setting is the most
suitable (refer to "Switching
on").
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature
• how often the lid is
opened
• the quantity of food
stored
• the location of the
appliance.
ENGLISH 7