EBSL7 ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. • Only use the core temperature sensor recommended for this appliance. • Be careful, when you touch the storage drawer. It can get hot. • To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence. 2.
ENGLISH • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. 2.2 Use WARNING! Risk of injury, burns or electric shock or explosion. • Use this appliance in a household environment. • Do not change the specification of this appliance. • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation.
www.electrolux.com 2.4 Internal light 2.5 Disposal • The type of light bulb or halogen lamp used for this appliance, is only for household appliances. Do not use it for house lighting. WARNING! Risk of electrical shock. • Before replacing the lamp, disconnect the appliance from the power supply. • Only use lamps with the same specifications. WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it.
ENGLISH 7 Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat. Core temperature sensor To measure how far the food is cooked. Glass dish with 2 grill inserts Sponge For absorbing residual water from the steam generator. Heated drawer Below the oven cavity is the heated drawer. You can pre-heat cookware in the drawer. 4. BEFORE FIRST USE WARNING! Refer to the Safety chapters. Refer to chapter "Care and Cleaning". 4.1 Initial Cleaning 4.
www.electrolux.com set the language, display contrast, display brightness and time of the day. Press or firm. to set the value. Press OK to con- 5. CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 11 Use the sensor fields to operate the appliance Number Sensor field 1 - Function Comment Display Shows the current settings of the appliance. ON / OFF To activate and deactivate the appliance.
ENGLISH Number Sensor field Function Comment Time and additional functions To set different functions. When a heating function operates, touch the sensor field to set the timer, Child Lock, Favourite Programme memory, Heat + Hold or Set + Go , or to change the settings of the Core Temperature Sensor (for select models only). Minute Minder To set the Minute Minder . 10 11 5.
www.electrolux.com 6. DAILY USE WARNING! Refer to the Safety chapters. 6.1 Navigating the menus Operation of the menus: 1. Activate the appliance. 2. Press or to select the menu option. 3. Press OK to move to submenu or accept setting. At every point you can get back to the . main menu with 6.2 The menus in overview Main menu Symbol Menu item Application Heating Functions Contains a list of heating functions. Assisted Cooking Contains a list of automatic cooking programmes.
ENGLISH Symbol Submenu Description Key Tones Activates and deactivates the tone of the touch fields. It is not possible to deactivate the tone of the ON / OFF touch field. Alarm/Error Tones Activates and deactivates the alarm tones. Cleaning Assistant Helps you with the cleaning procedure. Service Shows the software version and configuration. Factory Settings Resets all settings to factory settings. 11 6.
www.electrolux.com Heating function Application Quarter Steam + Heat To bake bread, roast large pieces of meat or to warm up chilled and frozen meals. Half Steam + Heat To steam dishes with a high moisture content and to poach fish, custard royale and terrines. Full Steam To steam vegetables, fish, potatoes, rice, pasta or special side-dishes. Submenu for: Specials Heating function Application Bread Baking To bake bread. Au Gratin For dishes such as lasagna or potato gratin.
ENGLISH 5. 6. If necessary, set the function Duration or End Time . The first steam shows after approximately 2 minutes. An acoustic signal sounds when the appliance is at approximately the set temperature. The signal sounds again at the end of the cooking time. Deactivate the appliance. When the steam generator is empty, an acoustic signal sounds. When the appliance cools down, soak up all remaining water from the steam generator with the sponge.
www.electrolux.com Setting the clock functions 1. Set a heating function. 2. 3. 4. Press again and again until the display shows the necessary clock function and the related symbol. Press or to set the necessary time. Press OK to confirm. When the time ends, an acoustic signal sounds. The appliance deactivates. The display shows a message. Press a sensor field to stop the signal. • With Duration and End Time you must set the heating function and the temperature first.
ENGLISH 8.2 Assisted Cooking with Weight Automatic This function automatically calculates the roasting time. To use it, it is necessary to input the food weight. Activating the function: 1. Activate the appliance. 2. Select Assisted Cooking . Press OK to confirm. 3. Select the category and dish. Press OK to confirm. 4. Select the Weight Automatic . Press OK to confirm. 15 5. Touch or to set the food weight. Press OK to confirm. The automatic programme starts. You can change the weight at any time.
www.electrolux.com 7. Remove the core temperature sensor plug from the socket and remove the meat from the oven. WARNING! The core temperature sensor is hot! There is the risk of burns! Be careful when you remove the tip and plug of the core temperature sensor. Useful information: • The core temperature sensor must stay in the meat and in the socket during the cooking process. • To change the core temperature press . 9.
ENGLISH Put the cookware equally in the drawer. Rearrange the cookware after half of the warming time (swap top and bottom). WARNING! The cookware becomes hot. 17 The temperature is automatic. If the heated drawer is activated, the heated drawer indicator in the control panel comes on. 10. ADDITIONAL FUNCTIONS 10.1 Favourite Programme menu You can save your favourite settings, like duration, temperature or heating function. They are available in the Favourite Programme menu. You can save 20 programmes.
www.electrolux.com 2. 3. 4. 5. Set the heating function. Press again and again until the display shows Duration . Set the time. Press again and again until the display shows SET + GO . 6. Press OK to confirm. To start SET + GO function, press any sensor field (except for ). The set heating function starts. When the heating function ends, an acoustic signal sounds. • You can activate and deactivate the SET + GO function in the Basic Settings menu. 10.
ENGLISH Remove the limescale residue with water and vinegar. 11.2 Shelf supports You can remove the shelf supports to clean the side walls. CAUTION! Chemical de-scaling agents can cause damage to the enamel. Follow the instructions of the manufacturer. Removing the shelf supports 1 3 2 1. 2. 3. Carefully pull the supports up and out of the front catch. Lightly move the supports on the front catch inwards. Pull the supports out of the rear catch.
www.electrolux.com 3. 4. Close the door until it is at an angle of approximately 45°. Hold the door with one hand on each side and pull it away from the appliance at an upwards angle. Put the door with the outer side down on a soft and level surface to prevent scratches. 45° Inserting the door To insert the door do the above steps in the opposite sequence. 11.5 Lamp WARNING! Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot.
ENGLISH Problem Possible cause 21 Remedy The appliance does not heat up. The appliance is deactivated. Activate the appliance. The appliance does not heat up. The clock is not set. Set the clock. The appliance does not heat up. The necessary settings are not set. Make sure that the settings are correct. The appliance does not heat up. The Child Lock is activated. Refer to "Activating and deactivating the Child Lock function". The appliance does not heat up. The fuse is released.
www.electrolux.com The handle profile can be replaced to match the décor of your kitchen. The change must be done by an authorized person. Use only genuine replacement parts. 13.1 Installing the oven WARNING! Installation into flammable material must agree with NIN SEV 1000 (Swiss Association of the Cantonal Fire Insurance Companies) fire protection guidelines and regulations. ca.50 A 757 N 762 A 435 170 A A A = appliance N = recess 1.
ENGLISH 23 13.2 Installing the oven under a work surface 600 WARNING! Installation into flammable material must agree with NIN SEV 1000 (Swiss Association of the Cantonal Fire Insurance Companies) fire protection guidelines and regulations. B A A A ca.50 A 757 N 762 + 3 A 435 170 A 160 A A 767 N 780 WARNING! When installing next to a wood-fuelled boiler, a heatproof and heatinsulating plate must be mounted at the height of the appliance and at least 30 cm deep.
www.electrolux.com Only a qualified person can connect the appliance to the electricity supply. D E 1. 2. 3. 4. F 5. 6. Open the mains terminal cover (D). Put the connection cable into the supplied rings (E). This is to prevent the cable from rubbing against the drawer. The connection cable is on the housing side. Install the cable grip (F). Connect the terminal as in the illustration. Put the cable into the strain relief clamp. Close the mains terminal cover. 13.
ENGLISH 14. CH 25 GARANTIE, GARANZIA, GUARANTEE 14.1 Kundendienst, service-clientèle, Servizio clienti, Customer Service Centres Servicestellen Points de Service Servizio dopo vendita Point of Service 5506 Mägenwil/Zürich Industriestrasse 10 3018 Bern Morgenstrasse 131 1028 Préver6928 Manno enges Le Trési 6 Via Violino 11 9000 St. Gallen Zürcherstrasse 204e 4052 Basel St.
www.electrolux.com 15. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable and electronic appliances. Do not dispose appliances marked with the symbol containers to recycle it. Help protect the environment and human health and to recycle waste of electrical with the household waste. Return the product to your local recycling facility or contact your municipal office.
ENGLISH 27
892934894-D-032012 www.electrolux.
