user manual Oven EBSL60
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.
electrolux 3 • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base. • Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer. Electrical connection • The appliance must be earthed.
electrolux You must replace them. Contact the service centre. • Be careful when you remove the door from the appliance. The door is heavy! • Do not clean catalytic enamel (if applicable). oven lamp. There is the risk of electrical shock. Service centre • Only an approved engineer can repair or work on the appliance. Contact an approved service centre. • Use only original spare parts. Oven lamp • Bulb lamps used in this appliance are special lamps selected for household appliances use only.
electrolux 5 10 Aluminium base plate 11 Shelf positions (levels) Oven accessories Meat probe - To measure how far the meat is cooked. Oven shelf - for cookware, cake tins, roasts. Flat baking tray - for cakes and biscuits. Turn spit - for roasting larger joints of meat and poultry. Deep roasting pan - To bake and roast or as pan to collect fat. BEFORE FIRST USE Warning! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance.
electrolux CONTROL PANEL Electronic programmer 1 1 Menu option symbol (with oven shelf level) 2 Clock 3 Heat indicator 2 3 5 4 4 Temperature / weight 5 Time functions Panel sensor fields overview Sensor field Function Comment To activate or deactivate the oven lamp. To light up the oven interior, for example for cleaning. To activate and deactivate the appliance. - To show the main menu. The set function deactivates (except for the countdown timer). To move down and up in the menu.
electrolux 7 Touch the sensor fields to operate the appliance. Make sure, that you only touch one sensor field. If you apply your finger too flat, you could touch more sensor fields. DAILY USE Warning! Refer to "Safety information" chapter. Display symbols During appliance operation display shows various symbols. Display (examples) Symbol Function Minute Minder 4:30 Time 10:00 The display shows the time set. Duration 1:00 Shows the time required for the cooking cycle.
electrolux Symbol Submenu Beef/Game/Lamb Poultry Fish Cake Pizza/Pie/Bread Casseroles/Gratins Convenience Specials Submenus for: Heating Functions Oven function Application Fan Cooking For baking on up to 3 oven levels at the same time. Set the oven temperatures 20-40 °C lower than when using Conventional. Conventional Cooking For baking and roasting on one oven level Pizza Setting For baking on one oven level dishes that require more intensive browning and a crispy base.
electrolux 9 Submenus for: My Programmes Symbol Submenu - 1 - My Programmes - 2- My Programmes - ... - Edit Programme Name Submenus for: Basic Settings Sy mb ol Submenu Description Set Time of Day Sets the current time on the clock. Time Indication When ON, the displays shows the current time when you deactivate the appliance. Set + Go When ON you can choose Set + Go function in the Select Options window. Heat+Hold When ON you can choose Heat+Hold function in the Select Options window.
electrolux When the appliance operates at the set temperature, an acoustic signal sounds. Showing the oven temperature Touch + or -at the same time. The display shows the oven temperature. Heat-up indicator When you activate an oven function, the bar on the display comes on. The bar shows that the temperature increases. Rapid heat-up indicator For some oven functions the rapid heat-up function decreases the heat-up time automatically.
electrolux 11 3. Touch again and again until the display shows Duration . 4. Set the time. 5. Touch again and again until the display shows SET+GO . 6. Touch OK to confirm. To start SET+GO touch any sensor field ). The set oven function starts. (except When the oven function ends, an acoustic signal sounds. When the oven function operates, the function Key Lock is on. You can activate and deactivate the SET+GO function in the Basic Settings menu.
electrolux 2. Touch or to set the function Assisted Cooking , the necessary category and the dish. 3. Touch or to set the function Meatprobe Automatic . 4. Touch OK to confirm. The display shows „ Meatprobe “. 5. Install the meat probe. When the programme ends, an acoustic signal sounds. Use a sensor field to deactivate the acoustic signal. 6. Remove the meat probe. Warning! The meat probe is hot! Risk of burns! Be careful when you remove the tip and plug of the meat probe.
electrolux 13 5. Set the oven function and, if necessary, the oven temperature. The appliance calculates the provisional end time for the set temperature (at least 120°C) again and again. This procedure can take approximately 30 minutes. The display constantly shows the new provisional end time. The meatprobe must stay in the meat and in the meatprobe socket during the cooking process. 6. When the meat reaches set core temperature, an acoustic signal sounds. The appliance deactivates automatically.
electrolux Inserting the oven shelf and deep roasting pan together 5 3 1 • Choose the Turn spit oven function. Inserting the oven accessories Put in the slide-in accessories so that the double side edges are at the back of the oven and point down to the bottom. Push the slide-in accessories between the guidebars of one of the oven levels. Put the oven shelf on the deep roasting pan. Push the deep roasting pan between the guide-bars of one of the oven levels.
electrolux 15 Activating the Child Lock 1. Deactivate the appliance. 2. Press and - at the same time until the display shows a message. Deactivating the Child Lock 1. Do the above steps again. Cooling fan When the appliance operates, the cooling fan switches on automatically to keep the surfaces of the appliance cool. If you switch off the appliance, the cooling fan continues to operate until the appliance cools down. The last temperature set flashes in the display.
electrolux Shelf Support Rails Removing the shelf support rails 1. Pull the front of the shelf support rail away from the side wall. Replacing the oven lamp 1. You can find the lamp glass cover at the back of the cavity. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. Replace the oven lamp with applicable 300°C heat-resistant oven lamp. Important! Use the same oven lamp type. 4. Install the glass cover. Replacing the oven lamp (left side of the oven cavity): 1.
electrolux 17 4. Install the glass cover. 2. Rotate the fat trap to the left from the oven roof. 5. Install the left shelf support rail. Fat trap Warning! Before you remove the fat trap deactivate the appliance. Make sure that the appliance is cold. There is a risk of burns! The fat trap almost do not need maintenance actions. However, if you frequently prepare very fatty foods a residues may occur. Removing the fat trap: 1. Pull the top heating element out of the plug connection to the front. 3.
electrolux 2. Pull the heating element out of the plug connection to the front. 3. Close the oven door until the first position (angle approximately 45°). 45° 3. Reassembly in reverse order. Make sure the heating element has a good fit in the connecting socket when inserting. Oven door To clean the oven door remove it. Caution! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door 1. Open the oven door as far as it goes. 2.
electrolux 19 3. Fold down the clamping levers (A) on the both door hinges back into their original positions. 4. Close the oven door. A WHAT TO DO IF… Warning! Refer to "Safety information" chapter.
electrolux Problem Possible cause A fault code that is not listed above appears in the clock display Remedy Electronic fault If you cannot find a solution to the problem yourself, contact your dealer or the service centre. Deactivate and activate the appliance again via the house fuse or the safety switch in the fuse box. If the fault code is appeared again, please contact the Customer Care Department The necessary data for the service centre is on the rating plate.
electrolux 21 After successful connection to the electricity supply (see "Electrical connection"): 1. Push the cooker into the recess so that it is flush with the surrounding units. B ca.50 A 595 N 600 A 180 A 442 N min. 550 A 567 20 115 N 560-568 A 592 A = appliance N = recess 2. Use at least 2 screws to fix the oven on both sides (Detail A). plate at appliance's height and provide a depth of at least 30 cm depth. To secure the oven you can drill 2 x 2.
electrolux and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
electrolux 23 chase or delivery to the consumer (with a guarantee certificate, invoice or sales receipt serving as proof). The guarantee covers the costs of materials, labour and travel. The guarantee will lapse if the operating instructions and conditions of use are not ad- hered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components.
www.electrolux.
