EBSL40XCN EBSL40XSP EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 7 4. CONTROL PANEL............................................................................................... 8 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • • Always use oven gloves to remove or put in accessories or ovenware. Before carrying out any maintenance, disconnect the appliance from the power supply. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance.
ENGLISH • • • • • • • • • • • electrical ratings of the mains power supply. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. Do not let mains cables touch or come near the appliance door, especially when the door is hot.
www.electrolux.com moisture can build up behind a closed furniture panel and cause subsequent damage to the appliance, the housing unit or the floor. Do not close the furniture panel until the appliance has cooled down completely after use. 2.4 Care and cleaning WARNING! Risk of injury, fire, or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break.
ENGLISH 3. PRODUCT DESCRIPTION 3.1 General overview 1 2 3 4 5 5 4 8 3 6 2 1 1 Control panel 2 Electronic programmer 3 Socket for the core temperature sensor 4 Heating element 5 Lamp 6 Fan 7 Shelf support, removable 8 Shelf positions 7 3.2 Accessories Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat. Food Sensor To measure the temperature inside the food.
www.electrolux.com 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 11 Use the sensor fields to operate the oven. Sensor field 1 2 3 4 5 6 7 8 9 - Function Comment Display Shows the current settings of the oven. ON / OFF To turn on and off the oven. Heating Functions or Assisted Cooking Press the sensor field to choose the menu: Assisted Cooking or Heating Functions. To turn on or turn off the light, press the field for 3 seconds.
ENGLISH Sensor field 10 11 Function Comment Time and additional functions To set different functions. When a heating function operates, press the sensor field to set the timer or the functions: Function Lock, Favourites, Heat + Hold, Set + Go. You can also change the settings of the core temperature sensor. Minute Minder To set the function: Minute Minder. 4.2 Display A 9 B C E D A. B. C. D. E.
www.electrolux.com Symbol Function Weight Automatic The display shows that the automatic weight system is on or that weight can be changed. Heat + Hold The function is on. 5. BEFORE FIRST USE WARNING! Refer to Safety chapters. 5.1 Initial Cleaning Remove all accessories and removable shelf supports from the oven. Refer to "Care and cleaning" chapter. Clean the oven and the accessories before first use. Put the accessories and the removable shelf supports back to their initial position. 5.
ENGLISH 11 Submenu for: Basic Settings Symbol / Menu Description item Sets the current time Set Time of Day on the clock. Time Indication When ON, the display shows the current time when you deactivate the appliance. Fast Heat Up When ON, the function decreases the heat-up time. Set + Go To set a function and activate it later with a press of any symbol on the control panel. Heat + Hold Keeps the prepared food warm for 30 minutes after a cooking cycle finished.
www.electrolux.com Heating function Moist Fan Baking Frozen Foods Application This function is designed to save energy during cooking. For the cooking instructions refer to "Hints and tips" chapter, Moist Fan Baking. The oven door should be closed during cooking so that the function is not interrupted and to ensure that the oven operates with the highest energy efficiency possible. When you use this function, the temperature in the cavity may differ from the set temperature.
ENGLISH Heating function 6.6 Heat-up indicator Application To defrost food (vegetables and fruit). The defrosting time depends on the amount and size of the frozen food. Defrost 13 To bake bread. When you turn on a heating function, the bar on the display comes on. The bar shows that the temperature increases. When temperature is reached the buzzer sounds 3 times and the bar flashes and then disappears. 6.7 Fast Heat Up This function decreases the heat-up time. Bread Baking 6.
www.electrolux.com 7.2 Setting the clock functions Before you use the functions: Duration, End Time, you must set a heating function and temperature first. The oven turns off automatically. You can use the functions: Duration and End Time at the same time if you want to automatically turn on and turn off the oven on a given time later. The functions: Duration and End Time do not work when you use the core temperature sensor. The function: Heat + Hold keeps prepared food warm at 80 °C for 30 minutes.
ENGLISH 8.2 Assisted Cooking with Weight Automatic This function automatically calculates the roasting time. To use it, it is necessary to input the food weight. 1. Turn on the oven. 2. Select the menu: Assisted Cooking. to confirm. Press 3. Select the category and dish. Press to confirm. 4. Select the function: Weight Automatic. Press 5. Press 15 The automatic programme starts. 6. You can change the weight at any time. Press or to change the weight. 7. When the time ends, a signal sounds.
www.electrolux.com 3. Insert the tip of the core temperature sensor exactly in the centre of the casserole. The core temperature sensor should be stabilized in one place during baking. Use a solid ingredient to achieve that. Use the rim of the baking dish to support the silicone handle of the core temperature sensor. The tip of the core temperature sensor should not touch the bottom of a baking dish. The display shows the core temperature sensor symbol. or in less than 5 4.
ENGLISH 17 When the dish is at the set temperature, an acoustic signal sounds. The appliance deactivates automatically. 9. Touch any symbol to stop the signal. 10. Remove the core temperature sensor plug from the socket and remove the dish from the appliance. WARNING! There is a risk of burns as the core temperature sensor becomes hot. Be careful when you unplug it and remove it from the food. 9.
www.electrolux.com 2. Set a heating function. press to overwrite an existing programme. You can change the name of a programme in the menu: Edit Programme Name. to confirm. 3. Press 4. Select your favourite programme name. When the heating function ends, a signal sounds. to confirm. to go directly to menu: 10.2 Using the Child Lock When the Child Lock is on, the oven cannot be turned on accidentally. 1. Press to confirm. Press any symbol (except for ) to start the function: Set + Go.
ENGLISH OFF), the display goes back to the day brightness mode for the next 10 seconds. – if the oven is turned off and you set the function: Minute Minder. When the function ends, the display goes back to the night brightness. 19 10.7 Cooling fan When the oven operates, the cooling fan turns on automatically to keep the surfaces of the oven cool. If you turn off the oven, the cooling fan can continue to operate until the oven cools down. 11. CARE AND CLEANING WARNING! Refer to Safety chapters. 11.
www.electrolux.com of the cleaning with the function: End Time. The signal sounds at the end of cleaning. The oven turns off. 3. Press any sensor field to stop the signal. 4. When the oven cools down, clean the cavity with a wet soft cloth. Spots or discolouration of the catalytic coating have no effect on Catalytic cleaning. 11.4 Removing and installing the door You can remove the door to clean it. WARNING! The door is heavy. 1. Open the door fully. 2.
ENGLISH 3. Clean the glass cover. 4. Replace the lamp with a halogen, 230 V, 25 W, 300 °C heat resistant lamp. 21 5. Install the glass cover. 6. Install the left shelf support. 12. TROUBLESHOOTING WARNING! Refer to Safety chapters. 12.1 What to do if... Problem Possible cause Remedy You cannot activate or operate the oven. The oven is not connected to an electrical supply or it is connected incorrectly.
www.electrolux.com Problem Possible cause Remedy Steam and condensation You left the dish in the oven Do not leave the dishes in settle on the food and in the for too long. the oven for longer than 15 cavity of the oven. - 20 minutes after the cooking process ends. The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 12.
ENGLISH 23 min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess. A = appliance, N = recess B 180 mm A A ~50 mm A A 595 N mm 585-592 mm 442 mm 115 mm 20 mm N min.
www.electrolux.com B A N 600 mm A 595 mm 180 mm Only a qualified person can connect the appliance to the electricity supply. 442 mm 115 mm 1. Do the electrical connections as in the connection illustration. Phase definitions: L1, L2, L3 (or R, S, T). Voltage: 400V N min. 550 mm A 567 mm 20 mm N 560-568 mm A 592 mm 400V 3N~ 3. Use a minimum of 2 screws to attach the oven on the 2 sides (A).
ENGLISH 25 13.5 Electrical connection with the hob 2 You can connect the oven to an independent hob from the current range of Electrolux and AEG hobs. You can purchase the necessary connection cable separately: • AK - EB / GKTC (S) 1 m for ceramic hobs. • AK - EB / GKTCi (S) 1 m for induction hobs. The hob connection socket is at the top of the oven cabinet.
www.electrolux.com 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name Electrolux Model identification EBSL40XCN EBSL40XSP Energy Efficiency Index 81.2 Energy efficiency class A+ Energy consumption with a standard load, conventional mode 1.09 kWh/cycle Energy consumption with a standard load, fanforced mode 0.69 kWh/cycle Number of cavities 1 Heat source Electricity Volume 71 l Type of oven Built-In Oven Mass EBSL40XCN 38.
ENGLISH Cooking with the lamp off Turn off the lamp during cooking. Turn it on only when you need it. Moist Fan Baking Function designed to save energy during cooking. 15. CH 27 When you use this function the lamp automatically turns off after 30 seconds. You may turn on the lamp again but this action will reduce the expected energy savings.
867335766-D-232018 www.electrolux.
