User manual

and the bars of the heat indicator come
up, until the door unlocks again.
• During the pyrolytic cleaning the lamp is
off.
Cleaning reminder
To remind you that the pyrolytic cleaning
is necessary the cleaning reminder sym-
bol PYR flashes in the display for the next
10 seconds after you activate or deacti-
vate the appliance.
Clean the inner side of the door with hot
water to avoid any residue burning in be-
cause of hot air.
Clean the inner side of the door with hot
water, so that the residues do not burn
from the hot air.
The cleaning reminder goes
out:
• After end of the Pyro cleaning function.
•
If you press
and at the same
time while PYR flashes in the display.
10.2 Shelf supports
Removing the shelf supports
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
1
2
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
10.3 Removing / inserting the
door
To clean the door remove it.
ENGLISH 25