EBKGL6X EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 6 4. CONTROL PANEL............................................................................................... 7 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com • • • • • • Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
ENGLISH • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. • This appliance complies with the E.E.C. Directives. 2.
www.electrolux.com • Do not clean the catalytic enamel (if applicable) with any kind of detergent. • Only use lamps with the same specifications. 2.5 Internal light 2.6 Disposal • The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting. WARNING! Risk of electrical shock. • Before replacing the lamp, disconnect the appliance from the power supply. WARNING! Risk of injury or suffocation.
ENGLISH Grill- / Roasting pan Core temperature sensor To bake and roast or as a pan to collect fat. To measure how far the food is cooked. 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field 1 2 3 4 5 - Function Description DISPLAY Shows the current settings of the appliance. ON / OFF To activate and deactivate the appliance. Use it to access the oven functions.
www.electrolux.com Sensor Field Function Description UP, DOWN To move up or down in the menu. OK To confirm a selection or setting. To move down in the menu. OVEN LIGHT To activate or deactivate the lamp. CLOCK To set the clock functions. MINUTE MINDER To set the Minute Minder. 6 7 8 9 10 4.
ENGLISH Symbol Name Description Light You deactivated the light. Minute minder The minute minder function operates. 4.3 Heat up indicator If you activate an oven function, the bars 9 When the appliance is at the set temperature, the bars go off the display. come on in the display. The bars show that the temperature in the appliance increases or decreases. 5. BEFORE FIRST USE WARNING! Refer to Safety chapters. 5.
www.electrolux.com 6.2 Oven functions Oven function Application True Fan Cooking To bake on up to 3 shelf positions at the same time and to dry food. Set the temperature 20 - 40 °C lower than for Conventional Cooking. Pizza Setting To bake food on 1 shelf position for a more intensive browning and a crispy bottom. Set the temperature 20 - 40 °C lower than for Conventional Cooking. Conventional Cooking To bake and roast food on 1 shelf position. Slow Cooking To prepare tender, succulent roasts.
ENGLISH The Temperature / Time display shows the temperature in the appliance. The Fast heat up function decreases the heat up time. 2. Touch to go back to the set temperature or the display shows it automatically after five seconds. To activate the Fast heat up function 6.6 Fast heat up function The Fast heat up function is not available with every oven function.
www.electrolux.com flashes in the display. 3. Use or to set the END and to confirm. First you set the minutes and then the hours. When the set time ends, an acoustic symbol signal sounds for two minutes. and the time setting flash in the display. The appliance deactivates. 4. Touch a sensor field to stop the acoustic signal. 5. Deactivate the appliance. 7.5 Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 2 h 30 min). This function has no effect on the operation of the oven.
ENGLISH The appliance activates. 5. You can change the default weight value with or . Touch . 6. When the set time ends, an acoustic The appliance deactivates. 7. Touch a sensor field to stop the acoustic signal. signal sounds for two minutes. flashes. 9. USING THE ACCESSORIES WARNING! Refer to Safety chapters. 9.1 Core temperature sensor There are two temperatures to be set: the oven temperature and the core temperature. Refer to the Recipe Book.
www.electrolux.com While the appliance calculates the approximate duration time, the display shows the count up time. After the first calculation the display shows the approximate duration of the cooking time. The appliance continues to calculate the duration during the cooking. The display updates at intervals with the new duration value. When you cook with the core temperature sensor, you can change the temperature shown in the display.
ENGLISH 15 • All accessories have small indentations at the top of the right and left side to increase safety. The indentations are also antitip devices. • The high rim around the shelf is a device which prevents cookware from slipping. Wire shelf and the deep pan together: Push the deep pan between the guide bars of the shelf support and the wire shelf on the guide bars above. 10. ADDITIONAL FUNCTIONS 10.1 Using My Favourite Programme function 10.
www.electrolux.com The Function Lock prevents an accidental change of the oven function. 1. To activate the function activate the appliance. 2. Activate an oven function or setting. and at the 3. Touch and hold same time for 2 seconds. An acoustic signal sounds. Loc comes on in the display. To deactivate the Function Lock repeat step 3. 10.4 Using the settings menu You can set the settings menu only when the appliance is deactivated.
ENGLISH 10.6 Brightness of the display There are two modes of display brightness: • Night brightness - when the appliance is deactivated, the brightness of the display is lower between 10 PM and 6 AM. • Day brightness: – when the appliance is activated. – if you touch a sensor field during the night brightness (apart from ON / OFF), the display goes back to the day brightness mode for the next 10 seconds. 17 – if the appliance is deactivated and you set the Minute Minder.
www.electrolux.com 11.3 Catalysis (Refresh programme) CAUTION! Do not clean the catalytic surface with oven sprays, abrasive cleaning agents, soap or other cleaning agents. This will damage the catalytic surface. Wipe off the bottom of the cavity with a soft cloth. Remove heavy dirt with normal cleaning agents or oven spray commercially available. Make sure to avoid any contact of the cleaning agent with the catalytic coated walls and top.
ENGLISH 45° 4. Hold the door with one hand on each side and pull it away from the appliance at an upwards angle. 5. Put the door with the outer side down on a soft cloth on a stable surface. This is to prevent scratches. When the cleaning is completed, install the door. Do the above steps in the opposite sequence. 19 2. Clean the glass cover. 3. Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat resistant lamp. 4. Install the glass cover. The side lamp 1.
www.electrolux.com 12.1 What to do if... Problem Possible cause Remedy The oven does not heat up. The oven is deactivated. Activate the oven. The oven does not heat up. The clock is not set. Set the clock. The oven does not heat up. The necessary settings are not set. Make sure that the settings are correct. The oven does not heat up. The automatic switch-off is activated. Refer to "Automatic switchoff". The oven does not heat up. The Child Lock is on. Refer to "Using the Child Lock".
ENGLISH Problem Possible cause Remedy The display shows an error code that is not in this table. There is an electrical fault. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again. • If the display shows the error code again, contact the Customer Care Department. The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 1. Deactivate the oven. 2.
www.electrolux.com min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess.
ENGLISH 23 min. 20 mm A A B 10 mm 13.3 Installing the oven under a work surface Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2.
www.electrolux.com 400V 2~ PE L1 L2 L3 1 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm 400V 400V 3~ 400V 24 2 3 5 4 PE L1 1 = 70 mm L2 2 3 5 4 1 2 3 4 2. Secure the cable grip. 2 13.5 Electrical connection with the hob You can connect the oven to an independent hob from the current range of Electrolux and AEG hobs. You can purchase the necessary connection cable separately: • AK - EB / GKTC (S) 1 m for ceramic hobs. • AK - EB / GKTCi (S) 1 m for induction hobs.
ENGLISH 25 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name Electrolux Model identification EBKGL6XCN EBKGL6XSP EBKGL6XWE Energy Efficiency Index 104.7 Energy efficiency class A Energy consumption with a standard load, conventional mode 0.99 kWh/cycle Energy consumption with a standard load, fanforced mode 0.
15. www.electrolux.com CH GUARANTEE Customer Service Centres Point of Service Industriestrasse 10 5506 Mägenwil Le Trési 6 1028 Préverenges Via Violino 11 6928 Manno Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke St. Jakob-Turm Birsstrasse 320B 4052 Basel Comercialstrasse 19 7000 Chur Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111 Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel.
ENGLISH 27
867314698-A-352014 www.electrolux.
