EBGL80 ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • Before maintenance cut the power supply. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. • Excess spillage must be removed before the pyrolytic cleaning. Remove all parts from the oven. • Only use the core temperature sensor recommended for this appliance.
ENGLISH • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable. Contact the Service or an electrician to change a damaged mains cable. • Do not let mains cables to come in touch with the appliance door, specially when the door is hot. • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
www.electrolux.com • Make sure the appliance is cold. There is the risk that the glass panels can break. • Replace immediately the door glass panels when they are damaged. Contact the Service. • Be careful when you remove the door from the appliance. The door is heavy! • Clean regularly the appliance to prevent the deterioration of the surface material. • Remaining fat or food in the appliance can cause fire. • Clean the appliance with a moist soft cloth. Only use neutral detergents.
ENGLISH 3. PRODUCT DESCRIPTION 1 1 Control panel 2 2 Electronic programmer 3 4 5 6 5 4 11 3 2 1 10 3 Socket for the core temperature sen- sor 4 Heating element 5 Odour filter 6 Lamp 7 7 Fan 8 9 8 Rear wall heating element 9 Bottom heat 10 Shelf support, removable 11 Shelf positions 3.1 Accessories Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat.
www.electrolux.com 4. BEFORE FIRST USE WARNING! Refer to the Safety chapters. After the software version goes off, the display shows h and 12:00. Setting the time of day: 4.1 Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. 1. Touch 2. Touch . 3. Touch or or to set hours. to set minutes. 4. Refer to chapter "Care and Cleaning". Touch or . The Temperature / Time display shows the new time. 4.
ENGLISH Sensor Field Function 9 Description 4 MY FAVOURITE PROGRAMME To store your favourite programme. Use it to access your favourite programme directly or when the appliance is deactivated. 5 TEMPERATURE / FAST HEAT UP To set and show the cavity temperature or the core temperature sensor temperature. If you press and hold it for three seconds, it turns the Fast heat up function ON or OFF.
www.electrolux.com Symbols / Name Description h / min A clock function operates. Odour filter The odour filter operates. Temperature / fast heat up The function operates. Temperature The current temperature is indicated Core temperature sensor The core temperature sensor is in the core temperature sensor socket. Door lock The door lock function operates. Oven light You deactivated the light. Minute minder The minute minder function operates. 5.
ENGLISH Heating function 11 Application 7 Keep Warm 8 Grilling 9 Fast Grilling 10 Turbo Grilling To keep food warm. To grill flat food and to toast bread. To grill flat food in large quantities and to toast bread. To roast larger meat joints or poultry with bones on one shelf position. Also to gratinate and to brown. 6.1 Setting the heating function 6.4 Fast Heat Up function 1. Touch . The display shows a symbol, the number of the heating function and the preset temperature. 2.
www.electrolux.com • Cooking with the lamp off - Touch to deactivate the lamp during cooking. • Deactivating the display - If necessary, you can fully deactivate the appli- and at the same ance. Touch time until the display goes out. This step also activates the appliance. 7. CLOCK FUNCTIONS SYMBOL FUNCTION DESCRIPTION TIME OF DAY To show the time of day. To change the time of day, refer to 'Setting the time of day'. DURATION To set how long the appliance operates.
ENGLISH appliance. You can set the MINUTE MINDER at any time and also when the appliance is off. 6. 1. Touch display. 2. 7.5 Setting the Time delay function Use or to set the MINUTE MINDER. First you set the seconds and then minutes and hours. . and "00" flash in the 3. Touch and at the same time to reset the set time. 4. Touch or the MINUTE MINDER starts automatically after five seconds. When set time ends, an acoustic signal sounds for two minutes. "00:00" and flash in the display. 5.
www.electrolux.com 9. USING THE ACCESSORIES WARNING! Refer to the Safety chapters. 9.1 Core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates. 6. There are two temperatures to set: • The oven temperature: refer to the table for roasting in the recipe book. • The core temperature: refer to the table for the core temperature sensor in the recipe book.
ENGLISH When you cook with the core temperature sensor, you can change the temperature shown in the display. After you put the core temperature sensor in the socket and set a heating function and temperature, the display shows the current core temperature. 15 Touch again and again to see three other temperatures: • The set core temperature • The current oven temperature • The current core temperature 9.
www.electrolux.com 10. ADDITIONAL FUNCTIONS If the appliance has the Pyrolytic cleaning function and the function operates, the door is locked. SAFE comes on in the display when you touch a sensor field. 10.1 My Favourite Programme function Use this function to save your favourite settings of temperature and time for a heating function. 1. Set the temperature and time for a heating function or programme. 2. 3. Touch and hold for more than three seconds. An acoustic signal sounds.
ENGLISH Indicator of the setting menu Description Value to set SET5 BRIGHTNESS LOW / MEDIUM / HIGH SET6 ODOUR FILTER ON / OFF SET7 SERVICE MENU --- SET8 RESTORE SETTINGS YES / NO 17 1) It is not possible to deactivate the tone of the ON / OFF sensor field. Activate the Settings menu: 1. When the appliance is deactivated, touch and hold for three seconds. The display shows "SET1" and "1" flashes. 2. Touch / 3. Touch . 4. Touch / of the setting. to set the setting. 5. Touch . 10.
www.electrolux.com Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. • To clean metal surfaces, use a usual cleaning agent. • Clean the oven interior after each use. Then you can remove dirt more easily and it does not burn on. • Clean all oven accessories after each use and let them dry. • If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher.
ENGLISH 19 11.3 Shelf supports Removing the shelf supports You can remove the shelf supports to clean the side walls. 1. Pull the front of the shelf support away from the side wall. 2. Pull the rear end of the shelf support away from the side wall and remove it. 2 1 Installing the shelf supports Install the shelf supports in the opposite sequence. 11.4 Removing / inserting the door To clean the door remove it. Removing the door CAUTION! Be careful when you remove the door from the appliance.
www.electrolux.com 3. 4. Close the door until it is at an angle of approximately 45°. Hold the door with one hand on each side and pull it away from the appliance at an upwards angle. Put the door with the outer side down on a soft and level surface to prevent scratches. 45° 5. Now you can remove the inner glass panels and clean them. Inserting the door To insert the door do the above steps in the opposite sequence.
ENGLISH 2. 3. 4. 21 Clean the glass cover. Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat resistant oven lamp. Install the glass cover. Replacing the side lamp: Remove the left shelf support to get access to the lamp. 2. Use a narrow, blunt object (e.g. a teaspoon) to remove the glass cover. Clean the glass cover. 1. 3. 4. 5. Replace the lamp with a halogen, 230 V, 25 W, 300 °C heat resistant oven lamp. Install the glass cover. Install the shelf support. 12.
www.electrolux.com Possible cause Solution The display shows C2. Problem You want to start the pyrolytic cleaning, keep warm or defrost function but you did not remove core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows F102. The door lock is defective.
ENGLISH 23 13. INSTALLATION WARNING! Refer to the Safety chapters. min. 3 mm To lift the appliance, do not use the door handle. 13.1 Installing the oven A = appliance N = recess B A A 180 A WARNING! Installation into flammable material must agree with NIN SEV 1000 (Swiss Association of the Cantonal Fire Insurance Companies) fire protection guidelines and regulations. ca.50 A 595 N 585-592 442 1. 115 CAUTION! Make sure the cable is free when you slide the appliance. N min.
www.electrolux.com 13.2 Installing the oven under a work surface Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". B 180 A A = appliance N = recess ca.50 A N 600 WARNING! Installation into flammable material must agree with NIN SEV 1000 (Association of Cantonal Fire Insurers) fire protection guidelines and regulations. A 595 442 115 CAUTION! Make sure the cable is free when you move the appliance. N min. 550 A 567 20 N 560-568 1.
ENGLISH 400V PE L1 L2 L3 1 Only a qualified person can connect the appliance to the electricity supply. 400V 2~ 400V 400V 3~ 2 3 5 4 PE L1 L2 1 2 3 5 4 1. 2. Do the electrical connections as in the connection illustration. Connection diagram 400V Phase definitions: L1, L2, L3 (or R, S, T). Secure the cable grip. WARNING! If service is required always disconnect the appliance from the power supply.
www.electrolux.com 13.4 Electrical connection with the hob You can connect the oven to an independent hob from the current range of Electrolux and AEG hobs. You can purchase the necessary connection cable separately: • AK - EB/GKTC (S) 1 m for ceramic hobs. • AK - EB/GKTCi (S) 1 m for induction hobs. The hob connection socket is at the top of the oven cabinet. 14. CH GARANTIE, GARANZIA, GUARANTEE 14.
ENGLISH sont pas valables en cas d’intervention d’un tiers non autorisé, de l’emploi de pièces de rechange non originales, d’erreurs de maniement ou d’installation dues à l’inobser-vation du mode d’emploi, et pour des dommages causés par des influences extérieures ou de force majeure. Garanzia Per ogni prodotto concediamo una garanzia di 2 anni a partire dalla data di consegna o dalla sua messa in funzione.
892934917-F-412013 www.electrolux.
