EBGL80CN EBGL80SP EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 7 4. CONTROL PANEL............................................................................................... 8 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • • Before maintenance cut the power supply. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
ENGLISH • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. • Do not let mains cables touch or come near the appliance door, especially when the door is hot.
www.electrolux.com unit or the floor. Do not close the furniture panel until the appliance has cooled down completely after use. 2.4 Care and cleaning • WARNING! Risk of injury, fire, or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break. • Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
ENGLISH 2.7 Disposal • Remove the door catch to prevent children or pets from becoming trapped in the appliance. WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains electrical cable close to the appliance and dispose of it. 2.8 Service • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. 3. PRODUCT DESCRIPTION 3.
www.electrolux.com 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field 1 2 3 4 5 - Function Description DISPLAY Shows the current settings of the appliance. ON / OFF To activate and deactivate the appliance. Use it to access the oven functions. OPTIONS To set an oven function, a cleaning function or an automatic programme. MY FAVOURITE PROGRAMME To store your favourite programme.
ENGLISH 4.2 Display A B G C F E D A. Oven function symbol B. Temperature / time of day display C. Cooking time display / Duration / Minute Minder D. Residual heat indicator E. Indicators for the clock functions F. Heat-up indicator / Fast Heat Up indicator G. Number of an oven function / programme Other indicators of the display: Symbol / Name Description Automatic programme You can choose an automatic programme. My favourite programme The favourite programme operates.
www.electrolux.com Refer to "Care and cleaning" chapter. Put the accessories and the removable shelf supports back to their initial position. Clean the appliance and the accessories before first use. 6. DAILY USE • the manual mode • automatic programmes WARNING! Refer to Safety chapters. 6.1 Operating the appliance To operate the appliance you can use: 6.2 Oven functions Oven function Application True Fan Cooking To bake on up to three shelf positions at the same time and to dry food.
ENGLISH The lamp may automatically deactivate at a temperature below 60 °C during some oven functions. 6.3 Setting the oven function 1. Activate the appliance with . The display shows the set temperature, the symbol and the number of the oven function. 2. Touch function. or to set an oven 3. Touch or the appliance starts automatically after five seconds. If you activate the appliance and do not set an oven function or programme, the appliance deactivates automatically after 20 seconds. 6.
www.electrolux.com Clock function 00:00 Application COUNT UP TIMER To set the count up, which shows how long the appliance operates. This function has no effect on the operation of the appliance. It is on immediately when the oven starts to heat. The COUNT UP TIMER is not activated if DURATION and END are set. 7.2 Setting and changing the time After the first connection to the mains, wait until the display shows "12" flashes. 1. Touch or 2. Touch . 3. Touch or and 12:00. to set the hours.
ENGLISH and "00" flash in the display. 2. Use to switch between options. First you set the seconds, then the minutes and the hours. 3. Use or MINDER and to set the MINUTE to confirm. or the MINUTE MINDER 4. Touch starts automatically after 5 seconds. When the set time ends, an acoustic signal sounds for 2 minutes and 00:00 and 13 5. Touch a sensor field to stop the acoustic signal. 7.
www.electrolux.com the meat is at the set temperature, the appliance deactivates. CAUTION! Only use the core temperature sensor supplied or the correct replacement parts. The core temperature sensor must stay in the meat and in the socket during the cooking. 1. Activate the appliance. 2. Put the point of the core temperature sensor (with on the handle) into the centre of the meat. 3. Put the plug of the core temperature sensor into the socket at the front of the appliance.
ENGLISH WARNING! Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns. 15 Wire shelf and the deep pan together: Push the deep pan between the guide bars of the shelf support and the wire shelf on the guide bars above and make sure that the feet point down. 9.2 Inserting the accessories Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the feet point down. Small indentation at the top increase safety.
www.electrolux.com 10.2 Using the Child Lock The Child Lock prevents an accidental operation of the appliance. If the Pyrolysis function operates, the door is locked. A message comes on in the display when you touch a sensor field. 1. To activate the function activate the appliance. 2. Activate an oven function or setting. 3. Touch and hold and at the same time for 2 seconds. An acoustic signal sounds. Loc comes on in the display. To deactivate the Function Lock repeat step 3.
ENGLISH 10.5 Automatic Switch-off For safety reasons the appliance deactivates automatically after some time if an oven function operates and you do not change any settings. Temperature (°C) Switch-off time (h) 30 - 115 12.5 120 - 195 8.5 200 - 245 5.5 250 - maximum 1.5 After the Automatic switch-off, touch a sensor field to operate the appliance again. The Automatic switch-off does not work with the functions: core temperature sensor, Light, Slow Cooking, Duration, End, Time delay.
www.electrolux.com 4. Touch again and again until the display shows "Pyro" and the number of the cleaning programme. 1 2 5. Touch . 6. Touch or to set the duration of the cleaning procedure: Install the shelf supports in the opposite sequence. Option Description 1 1:00 h for a low degree of dirt 2 1:30 h for a usual degree of dirt 3 2:30 h for a high degree of dirt 11.3 Pyrolysis CAUTION! Remove all accessories and removable shelf supports.
ENGLISH When the odour filter is on, the display shows the symbol . The odour filter stops when you deactivate the appliance or open the oven door. 19 8. Hold the door glass panels on their top edge one by one and pull them up out of the guide. 11.6 Removing and installing the door You can remove the door and the internal glass panels to clean it. The number of glass panels is different for different models. WARNING! Be careful when you remove the door from the appliance. The door is heavy. 9.
www.electrolux.com 11.7 Replacing the lamp 4. Install the glass cover. Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. The side lamp WARNING! Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot. 1. Remove the left shelf support to get access to the lamp. 2. Use a narrow, blunt object (e.g. a teaspoon) to remove the glass cover. 1. Deactivate the appliance. 2.
ENGLISH Problem Possible cause 21 Remedy The oven does not heat up. The automatic switch-off is activated. Refer to "Automatic switchoff". The oven does not heat up. The Child Lock is on. Refer to "Using the Child Lock". The oven does not heat up. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. The lamp does not operate. The lamp is defective. Replace the lamp.
www.electrolux.com Problem Possible cause Remedy The display shows an error code that is not in this table. There is an electrical fault. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again. • If the display shows the error code again, contact the Customer Care Department. The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 1. Deactivate the oven. 2.
ENGLISH 23 min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess. A = appliance, N = recess B 180 mm A A ~50 mm A A 595 N mm 585-592 mm 442 mm 115 mm 20 mm N min.
www.electrolux.com min. 20 mm A A B 10 mm 20 mm 13.3 Installing the oven under a work surface During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess.
ENGLISH 25 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm 2 = 70 mm 1 2 3 4 13.5 Electrical connection with the hob You can connect the oven to an independent hob from the current range of Electrolux and AEG hobs. You can purchase the necessary connection cable separately: 1 • AK - EB / GKTC (S) 1 m for ceramic hobs. • AK - EB / GKTCi (S) 1 m for induction hobs. The hob connection socket is at the top of the oven cabinet. 3 4 14. ENERGY EFFICIENCY 14.
www.electrolux.com Energy efficiency class A Energy consumption with a standard load, conventional mode 0.99 kWh/cycle Energy consumption with a standard load, fanforced mode 0.88 kWh/cycle Number of cavities 1 Heat source Electricity Volume 71 l Type of oven Built-In Oven Mass EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance. 14.
ENGLISH 27 Point of Service Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke St. Jakob-Turm Birsstrasse 320B 4052 Basel Comercialstrasse 19 7000 Chur Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111 Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel.
867316106-B-392016 www.electrolux.
