EBGL80 EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 7 4. CONTROL PANEL............................................................................................... 8 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com • • • • • • • Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Excess spillage must be removed before the pyrolytic cleaning. Remove all parts from the oven.
ENGLISH • • • • • • such a way that it cannot be removed without tools. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
www.electrolux.com • Make sure the appliance is cold. There is the risk that the glass panels can break. • Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre. • Be careful when you remove the door from the appliance. The door is heavy! • Clean regularly the appliance to prevent the deterioration of the surface material. • Remaining fat or food in the appliance can cause fire. • Clean the appliance with a moist soft cloth. Only use neutral detergents.
ENGLISH 2.8 Service • Use original spare parts only. • To repair the appliance contact an Authorised Service Centre. 3. PRODUCT DESCRIPTION 3.1 General overview 1 2 3 4 5 6 5 4 9 3 7 2 1 1 Control panel 2 Electronic programmer 3 Socket for the core temperature sensor 4 Heating element 5 Odour filter 6 Lamp 7 Fan 8 Shelf support, removable 9 Shelf positions 8 3.2 Accessories Grill- / Roasting pan Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits.
www.electrolux.com 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field 1 2 3 4 5 - Function Description DISPLAY Shows the current settings of the appliance. ON / OFF To activate and deactivate the appliance. Use it to access the oven functions. OPTIONS To set an oven function, a cleaning function or an automatic programme. MY FAVOURITE PROGRAMME To store your favourite programme.
ENGLISH 4.2 Display A B G C F E D A) Oven function symbol B) Temperature / time of day display C) Cooking time display / Duration / Minute Minder D) Residual heat indicator E) Indicators for the clock functions F) Heat-up indicator / Fast Heat Up indicator G) Number of an oven function / programme Other indicators of the display: Symbol / Name Description Automatic programme You can choose an automatic programme. My favourite programme The favourite programme operates.
www.electrolux.com Refer to "Care and cleaning" chapter. 2. Touch . 3. Touch or to set the minutes. Clean the appliance before first use. Put the accessories and the removable shelf supports back to their initial position. 4. Touch or . The Temperature / Time display shows the new time. 5.2 Setting the time 5.3 Changing the time After the first connection to the mains, all symbols in the display are on for some seconds. For the subsequent few seconds the display shows the software version.
ENGLISH Oven function Application Grilling To grill flat food and to toast bread. Fast Grilling To grill flat food in large quantities and to toast bread. Turbo Grilling To roast larger meat joints or poultry with bones on 1 shelf position. Also to make gratins and to brown. 6.3 Setting the oven function 1. Activate the appliance with . The display shows the set temperature, the symbol and the number of the oven function. 2. Touch function. 11 or to set an oven or the appliance starts 3.
www.electrolux.com Clock function Application DURATION To set how long the appliance operates. END To set when the appliance deactivates. You can use Duration and End at the same time (Time delay) if you want the appliance to activate and deactivate automatically later. 7.2 Count Up Timer The Count Up Timer is not activated if Duration and End are set. The Count Up Timer starts to count when the appliance starts to heat.
ENGLISH 7.6 Setting the Time delay function and END can be The DURATION used at the same time, if the appliance is to be switched on and off automatically 13 later. In this case, first set the DURATION and then the END function (refer to "Setting the DURATION" and "Setting the END" ). 8. AUTOMATIC PROGRAMMES WARNING! Refer to Safety chapters. There are 9 automatic programmes. The display shows the shelf position and the default cooking times for all automatic programmes.
www.electrolux.com The core temperature sensor must stay in the meat and in the socket during the cooking. 1. Activate the appliance. 2. Put the point of the core temperature on the handle) into the sensor (with centre of the meat. 3. Put the plug of the core temperature sensor into the socket at the front of the appliance. The display shows flashing and the default set core temperature. The temperature is 60 °C for the first operation, and the last set value for each subsequent operation.
ENGLISH 15 Push the baking tray between the guide bars of the shelf support and the wire shelf on the guide bars above. Baking tray: Wire shelf and the deep pan together: Push the baking tray between the guide bars of the shelf support. Push the deep pan between the guide bars of the shelf support and the wire shelf on the guide bars above. Deep pan: Push the deep pan between the guide bars of the shelf support.
www.electrolux.com The Function Lock prevents an accidental change of the oven function. • To activate the function touch . The appliance activates your favourite programme. 1. To activate the function activate the appliance. 2. Activate an oven function or setting. When the function operates, you can change the time and temperature. • To deactivate the function touch The appliance deactivates your favourite programme. . 10.2 Using the Child Lock 3.
ENGLISH 8 Description Value to set RESTORE SETTINGS ON / OFF 17 1) It is not possible to deactivate the tone of the ON / OFF sensor field. 1. When the appliance is deactivated, 10.6 Brightness of the display touch and hold for three seconds. The display shows SET1 and "1" flashes. There are two modes of display brightness: 2. Touch or 3. Touch . or 4. Touch of the setting. 5. Touch to set the setting. to change the value . 10.
www.electrolux.com • Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent. • If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can cause damage to the nonstick coating. 11.2 Removing the shelf supports To clean the oven, remove the shelf supports. 1. Pull the front of the shelf support away from the side wall.
ENGLISH 3 2:30 h for a high degree of dirt You can use the End function to delay the start of the cleaning procedure. 6. Touch function. to activate the Pyrolysis 19 WARNING! Be careful when you remove the door from the appliance. The door is heavy. 1. Open the door fully. 2. Fully press the clamping levers (A) on the two door hinges. 11.
www.electrolux.com When the cleaning is completed, install the glass panels and the door. Do the above steps in the opposite sequence. Install the smaller panel first, then the larger. 11.7 Replacing the lamp Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. WARNING! Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot. 2. Clean the glass cover. 3.
ENGLISH Problem Possible cause 21 Remedy The oven does not heat up. The fuse is released. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. The lamp does not operate. The lamp is defective. Replace the lamp. The display does not show the time during the off status. The display is deactivated. Touch and at the same time to activate the display again. The core temperature sensor does not operate.
www.electrolux.com Problem Possible cause Remedy The display shows an error code that is not in this table. There is an electrical fault. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again. • If the display shows the error code again, contact the Customer Care Department. The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 1. Deactivate the oven. 2.
ENGLISH 23 min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess. A = appliance, N = recess B 180 mm A A ~50 mm A A 595 N mm 585-592 mm 442 mm 115 mm 20 mm N min.
www.electrolux.com min. 20 mm A A B 10 mm 13.3 Installing the oven under a work surface Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance.
ENGLISH 400V 2~ PE L1 L2 L3 1 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm 400V 400V 400V 3~ 2 3 5 4 PE L1 1 = 70 mm L2 2 3 5 4 25 1 2 3 4 2. Secure the cable grip. 2 13.5 Electrical connection with the hob You can connect the oven to an independent hob from the current range of Electrolux and AEG hobs. You can purchase the necessary connection cable separately: • AK - EB / GKTC (S) 1 m for ceramic hobs. • AK - EB / GKTCi (S) 1 m for induction hobs.
www.electrolux.com 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name Electrolux Model identification EBGL80CN EBGL80SP Energy Efficiency Index 103.5 Energy efficiency class A Energy consumption with a standard load, conventional mode 0.99 kWh/cycle Energy consumption with a standard load, fanforced mode 0.
ENGLISH 15. CH 27 GUARANTEE Customer Service Centres Point of Service Industriestrasse 10 5506 Mägenwil Le Trési 6 1028 Préverenges Via Violino 11 6928 Manno Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke St. Jakob-Turm Birsstrasse 320B 4052 Basel Comercialstrasse 19 7000 Chur Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111 Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel.
867316106-A-412014 www.electrolux.
