EBGL40XCN EBGL40XSP EBGL40XWE EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 7 4. CONTROL PANEL............................................................................................... 8 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • • Always use oven gloves to remove or put in accessories or ovenware. Before carrying out any maintenance, disconnect the appliance from the power supply. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance.
ENGLISH • • • • • • • • • • • electrical ratings of the mains power supply. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. Do not let mains cables touch or come near the appliance door, especially when the door is hot.
www.electrolux.com moisture can build up behind a closed furniture panel and cause subsequent damage to the appliance, the housing unit or the floor. Do not close the furniture panel until the appliance has cooled down completely after use. 2.4 Care and cleaning WARNING! Risk of injury, fire, or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break.
ENGLISH 3. PRODUCT DESCRIPTION 3.1 General overview 1 2 3 4 5 5 4 8 3 6 2 1 1 Control panel 2 Electronic programmer 3 Socket for the core temperature sensor 4 Heating element 5 Lamp 6 Fan 7 Shelf support, removable 8 Shelf positions 7 3.2 Accessories Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat. Food Sensor To measure the temperature inside the food.
www.electrolux.com 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the oven. Sensor Field 1 2 3 4 5 - Function Description DISPLAY Shows the current settings of the oven. ON / OFF To turn the oven on and off. Use it to access the heating functions. OPTIONS To set a heating function, a cleaning function or an automatic programme. MY FAVOURITE PROGRAMME To store your favourite programme.
ENGLISH 4.2 Display A B G C F E D A. Oven function symbol B. Temperature / time of day display C. Cooking time display / Duration / Minute Minder D. Residual heat indicator E. Indicators for the clock functions F. Heat-up indicator / Fast Heat Up indicator G. Number of an oven function / programme Other indicators of the display: Symbol / Name Description Automatic programme You can choose an automatic programme. My favourite programme The favourite programme operates.
www.electrolux.com Clean the oven and the accessories before first use. Put the accessories and the removable shelf supports back to their initial position. 6. DAILY USE WARNING! Refer to Safety chapters. Oven function 6.1 Heating functions Oven function True Fan Cooking Pizza Setting Application To bake on up to three shelf positions at the same time and to dry food. Set the temperature 20 40 °C lower than for Conventional Cooking. To bake pizza. To make intensive browning and a crispy bottom.
ENGLISH The display shows the temperature in the oven. 2. Press or the display shows again the set temperature automatically after 5 seconds. 11 the Fast heat up is not available for the set function. Refer to "Additional functions" chapter, Using the settings menu. The Fast heat up decreases the heat up time. To turn on the Fast heat up press and 6.5 Fast heat up The Fast heat up is available only for some oven functions.
www.electrolux.com When the set time ends, the signal sounds for 2 minutes. and time setting flash in the display. The oven turns off. 7. Press a sensor field to stop the signal. 8. Turn off the oven. 7.4 Setting the END 1. Set an oven function and temperature. again and again until 2. Touch starts to flash. 3. Use or to set the END and to confirm. First you set the minutes and then the hours. When the set time ends, an acoustic signal sounds for 2 minutes. and the time setting flash in the display.
ENGLISH 4. Touch or wait five seconds until the appliance automatically starts to work. 5. When the set time ends, an acoustic signal sounds for two minutes. The flashes. symbol 6. Touch a sensor field to stop the acoustic signal. 7. Deactivate the appliance. 8.2 Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Activate the appliance. 2. Touch . 13 3. Touch or to set the weight programme. Refer to the "Recipe book".
www.electrolux.com You can set the core temperature only when flashes. If is in the display but does not flash before you set the core temperature, touch and or to set a new value. 6. Set the oven function and the oven temperature. The display shows the current core WARNING! Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns. 9.2 Inserting the accessories Wire shelf: Push the shelf between the guide bars of the shelf support .
ENGLISH 15 Small indentation at the top increase safety. The indentations are also anti-tip devices. The high rim around the shelf prevents cookware from slipping of the shelf. 10. ADDITIONAL FUNCTIONS 10.1 Using My Favourite Programme function An acoustic signal sounds. The display shows SAFE. To turn off the Child Lock function repeat step 3. Use this function to save your favourite temperature and time settings for an oven function or programme. 10.3 Using the Function Lock 1.
www.electrolux.com Description Value to set 4 BRIGHTNESS LOW / MEDIUM / HIGH 5 SERVICE MENU - 6 RESTORE SETTINGS YES / NO 1) It is not possible to deactivate the tone of the ON / OFF sensor field. 1. Press and hold for 3 seconds. The display shows SET1 and "1" flashes. 2. Press or 3. Press . to set the setting. 4. Press or of the setting. 5. Press to change the value . To exit the Settings menu, press press and hold or . 10.
ENGLISH To clean metal surfaces, use a dedicated cleaning agent. Install the removed accessories in the opposite sequence. Clean the oven interior after each use. Fat accumulation or other food remains may result in a fire. The risk is higher for the grill pan. 11.3 Catalysis (Refresh programme) Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent. Do not clean the accessories in the dishwasher. Clean stubborn dirt with a special oven cleaner.
www.electrolux.com 11.4 Removing and installing the door You can remove the door to clean it. WARNING! The door is heavy. The top lamp 1. Open the door fully. 2. Fully press the clamping levers (A) on the two door hinges. A 1. Turn off the oven. Wait until the oven is cooled down. 2. Disconnect the oven from the mains. 3. Put a cloth on the bottom of the cavity. A 3. Close the door until it is at an angle of approximately 45°. 1. Turn the lamp glass cover to remove it. 2. Clean the glass cover.
ENGLISH 19 12. TROUBLESHOOTING WARNING! Refer to Safety chapters. 12.1 What to do if... Problem Possible cause Remedy You cannot activate or operate the oven. The oven is not connected to an electrical supply or it is connected incorrectly. Check if the oven is correctly connected to the electrical supply (refer to the connection diagram if available). The oven does not heat up. The oven is deactivated. Activate the oven. The oven does not heat up. The clock is not set. Set the clock.
www.electrolux.com Problem Possible cause Remedy The display shows "C2". You want to start the Catal- Remove the core temperaysis or Defrost function, but ture sensor plug from the you did not remove the socket. core temperature sensor plug from the socket. The display shows "C3". The cleaning function does not operate. You did not fully close the door, or the door lock is defective. Fully close the door. The display shows an error code that is not in this table. There is an electrical fault.
ENGLISH 13.1 Lifting the appliance To lift the appliance, do not use the door handle. min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess.
www.electrolux.com B B 180 mm A A ~50 mm A A ~50 mm A N 600 mm A 595 mm 180 mm A 595 N mm 585-592 mm 442 mm 115 mm 442 mm N min. 550 mm A 567 mm 20 mm 115 mm 20 mm N min. 550 mm A 567 mm N 560-568 mm A 592 mm 3. Use a minimum of 2 screws to attach the oven on the 2 sides (A). N 560-568 mm A 592 mm 3. Use a minimum of 2 screws to attach the oven on the 2 sides (A).
ENGLISH electrical connection that is accessible and outside the coordination room. The length of the connection cable must be approximately 120 cm with lines connected directly to the mains. 2 Only a qualified person can connect the appliance to the electricity supply. 1. Do the electrical connections as in the connection illustration. Phase definitions: L1, L2 (or R, S). Voltage: 400V 400V 400V 2 ~ PE L1 L2 1 2 3 5 4 1 2. Secure the cable grip.
www.electrolux.com 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name Electrolux Model identification EBGL40XCN EBGL40XSP EBGL40XWE Energy Efficiency Index 103.5 Energy efficiency class A Energy consumption with a standard load, conventional mode 0.99 kWh/cycle Energy consumption with a standard load, fanforced mode 0.88 kWh/cycle Number of cavities 1 Heat source Electricity Volume 71 l Type of oven Built-In Oven Mass EBGL40XCN 39.
ENGLISH Keep food warm Choose the lowest possible temperature setting to use residual heat and keep a meal warm. The residual heat indicator or temperature appears on the display. 25 Deactivating the display You can turn off the display. Press and hold and at the same time. To turn it on repeat this step. Cooking with the lamp off Turn off the lamp during cooking. Turn it on only when you need it. 15.
www.electrolux.com For Switzerland: Where should you take your old equipment? Anywhere that sells new equipment or hand it in to official SENS collection points or official SENS recycling firms. The list of official SENS collection points can be found at www.erecycling.
ENGLISH 27
867314718-D-232018 www.electrolux.
