EBGL40 EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 6 4. CONTROL PANEL............................................................................................... 7 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • Before maintenance cut the power supply. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
ENGLISH • • • • • • • • Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. Do not let mains cables touch or come near the appliance door, especially when the door is hot. The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
www.electrolux.com 2.4 Care and cleaning household appliances. Do not use it for house lighting. WARNING! Risk of injury, fire, or damage to the appliance. WARNING! Risk of electrical shock. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break. • Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
ENGLISH 3.2 Accessories Grill- / Roasting pan Wire shelf To bake and roast or as a pan to collect fat. For cookware, cake tins, roasts. Core temperature sensor Baking tray To measure how far the food is cooked. For cakes and biscuits. 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field 1 2 3 - Function Description DISPLAY Shows the current settings of the appliance.
www.electrolux.com Sensor Field 4 5 Function Description MY FAVOURITE PROGRAMME To store your favourite programme. Use it to have access to your favourite programme directly or when the appliance is deactivated. TEMPERATURE / FAST HEAT UP To set and see the cavity temperature or the core temperature sensor temperature (if present). If you press and hold it for three seconds, it turns the Fast heat up function ON or OFF. UP, DOWN To move up or down in the menu.
ENGLISH Symbol / Name Description g An automatic programme with a weight input operates. h / min A clock function operates. Temperature / Fast heat up The function operates. Temperature The current temperature is indicated. Core temperature sensor The core temperature sensor is in the core temperature sensor socket. Light You deactivated the light. Minute minder The minute minder function operates. 4.
www.electrolux.com 6. DAILY USE • the manual mode • automatic programmes WARNING! Refer to Safety chapters. 6.1 Operating the appliance To operate the appliance you can use: 6.2 Oven functions Oven function Application True Fan Cooking To bake on up to three shelf positions at the same time and to dry food. Set the temperature 20 - 40 °C lower than for Top / Bottom Heat. Pizza Setting To bake food on one shelf position for a more intensive browning and a crispy bottom.
ENGLISH 3. Touch or the appliance starts automatically after five seconds. If you activate the appliance and do not set an oven function or programme, the appliance deactivates automatically after 20 seconds. 6.4 Changing the temperature Touch or to change the temperature in steps of 5 °C. When the appliance is at the set temperature, an acoustic signal sounds three times and the Heat up indicator goes out. 6.
www.electrolux.com 5. Use or DURATION. to set the hours for If you touch while you set the DURATION, the appliance switches to the setting of the END function. 6. When the set time ends, an acoustic signal sounds for two minutes. and time setting flash in the display. The appliance deactivates. 7. Touch a sensor field to stop the acoustic signal. 8. Deactivate the appliance. 7.4 Setting the END 1. Activate the appliance and set an oven function and temperature. 2.
ENGLISH 5. When the set time ends, an acoustic signal sounds for two minutes. The symbol flashes. 6. Touch a sensor field to stop the acoustic signal. 7. Deactivate the appliance. 8.2 Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Activate the appliance. 2. Touch . or to set the weight 3. Touch programme. Refer to the "Recipe book".
www.electrolux.com You can set the core temperature only when flashes. If is in the display but does not flash before you set the core temperature, touch and or to set a new value. 6. Set the oven function and the oven temperature. The display shows the current core WARNING! Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns. 9.
ENGLISH 15 Small indentation at the top increase safety. The indentations are also anti-tip devices. The high rim around the shelf prevents cookware from slipping. 10. ADDITIONAL FUNCTIONS 10.1 Using My Favourite Programme function An acoustic signal sounds. SAFE comes on in the display. To deactivate the Child Lock function repeat step 2. Use this function to save your favourite temperature and time settings for an oven function or programme. 10.3 Using the Function Lock 1.
www.electrolux.com Description Value to set 2 KEY TONE1) CLICK / BEEP / OFF 3 FAULTY TONE ON / OFF 4 BRIGHTNESS LOW / MEDIUM / HIGH 5 SERVICE MENU - 6 RESTORE SETTINGS YES / NO 1) It is not possible to deactivate the tone of the ON / OFF sensor field. 1. When the appliance is activated, 10.6 Brightness of the display touch then touch it again and hold for three seconds. The display shows SET1 and "1" flashes. There are two modes of display brightness: 2. Touch or 3. Touch .
ENGLISH 17 11. CARE AND CLEANING WARNING! Refer to Safety chapters. 11.1 Notes on cleaning • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. • To clean metal surfaces, use a dedicated cleaning agent. • Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. The risk is higher for the grill pan. • Clean stubborn dirt with a special oven cleaner. • Clean all accessories after each use and let them dry.
www.electrolux.com WARNING! Be careful when you remove the door from the appliance. The door is heavy. 1. Open the door fully. 2. Fully press the clamping levers (A) on the two door hinges. WARNING! Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot. 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker. The top lamp A A 1. Turn the lamp glass cover counterclockwise to remove it. 3.
ENGLISH 19 12. TROUBLESHOOTING WARNING! Refer to Safety chapters. 12.1 What to do if... Problem Possible cause Remedy You cannot activate or operate the oven. The oven is not connected to an electrical supply or it is connected incorrectly. Check if the oven is correctly connected to the electrical supply (refer to the connection diagram if available). The oven does not heat up. The oven is deactivated. Activate the oven. The oven does not heat up. The clock is not set. Set the clock.
www.electrolux.com Problem Possible cause Remedy The display shows "C2". You want to start the Defrost function, but you did not remove the core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows an error code that is not in this table. There is an electrical fault. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again.
ENGLISH 21 min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess. A = appliance, N = recess B 180 mm A A ~50 mm A A 595 N mm 585-592 mm 442 mm 115 mm 20 mm N min.
www.electrolux.com min. 20 mm A A B 10 mm 20 mm 13.3 Installing the oven under a work surface Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug.
ENGLISH 23 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm 2 = 70 mm 1 2 3 4 1 3 4 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name Electrolux Model identification EBGL40CN EBGL40SP Energy Efficiency Index 103.
www.electrolux.com Energy efficiency class A Energy consumption with a standard load, conventional mode 0.99 kWh/cycle Energy consumption with a standard load, fanforced mode 0.88 kWh/cycle Number of cavities 1 Heat source Electricity Volume 71 l Type of oven Built-In Oven Mass EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance. 14.
ENGLISH 25 Point of Service Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke St. Jakob-Turm Birsstrasse 320B 4052 Basel Comercialstrasse 19 7000 Chur Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111 Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel.
www.electrolux.
ENGLISH 27
867314706-B-352016 www.electrolux.
