EBGL40 ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • Before maintenance cut the power supply. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. • Only use the core temperature sensor recommended for this appliance. • To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence.
ENGLISH • Do not let mains cables to come in touch with the appliance door, specially when the door is hot. • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • If the mains socket is loose, do not connect the mains plug. • Do not pull the mains cable to disconnect the appliance.
www.electrolux.com • Clean regularly the appliance to prevent the deterioration of the surface material. • Remaining fat or food in the appliance can cause fire. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • If you use an oven spray, obey the safety instructions on the packaging. • Do not clean the catalytic enamel (if applicable) with any kind of detergent. 2.
ENGLISH 7 Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat. Core temperature sensor To measure how far the food is cooked. 4. BEFORE FIRST USE WARNING! Refer to the Safety chapters. 4.1 Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". 4.2 Setting and changing the time After the first connection to the mains, all symbols in the display are on for some seconds.
www.electrolux.com 5. CONTROL PANEL 5.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function Description - DISPLAY Shows the current settings of the appliance. 2 ON / OFF To activate and deactivate the appliance. Use it to access the heating functions. 3 OPTIONS To set an automatic programme or a heating function. 4 MY FAVOURITE PROGRAMME To store your favourite programme.
ENGLISH 9 5.2 Display A B C A) Heating function symbol B) Temperature / time of day display C) Cooking time display / Duration / Mi- nute Minder G F E D D) Residual heat indicator E) Indicators for the clock functions (refer to the table "Clock functions" ) F) Heat-up indicator / Fast Heat Up indi- cator G) Number of a heating function / pro- gramme 5.3 Other indicators of display Symbols / Name Description Automatic programme You can choose an automatic programme.
www.electrolux.com Heating function Application 1 True Fan Cooking To bake on up to 3 oven levels at the same time and to dry food. Set the oven temperatures 20 40 °C lower than when using Conventional Cooking. 2 Pizza Setting To bake food on one oven level for a more intensive browning and a crispy bottom. Set the oven temperatures 20 - 40 °C lower than when using Conventional Cooking. 3 Conventional Cooking To bake and roast food on one shelf position.
ENGLISH Activating the Fast Heat Up function: Activate a heating function. Touch and hold for more than three seconds. When you activate the Fast Heat Up function, the bars on the display flash one by one to show that the function operates appears on the display. and Useful information • The Fast heat up is not available with every oven function. An acoustic signal sounds if the Fast heat up is not available for the set function if Faulty tone is activated in the “Settings menu”. 6.
www.electrolux.com 6. 7. If you touch while you set the hours for DURATION, the appliance goes to the END function setting. When the set time ends, an acoustic signal sounds for two minutes. tion has no effect on the operation of the appliance. You can set the MINUTE MINDER at any time and also when the appliance is off. 1. Touch display. and the time setting flash in the display. The appliance deactivates. Touch a sensor field to stop the acoustic signal. Deactivate the appliance. 2.
ENGLISH 4. 5. 6. Touch or wait five seconds until the appliance automatically starts to work. When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. Touch any sensor field to stop an acoustic signal. 8.2 Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Activate the appliance. 2. Touch 3. Touch or to set the weight programme (refer to "Recipe book" ).
www.electrolux.com 6. You can set the core temperature only when flashes. If is in the display but does not flash before you set the core temperature, or to set a touch and new value. Set the heating function and the oven temperature. The display shows the current core temperature and the heat up symbol . The core temperature sensor must stay in the meat and in the socket during the cooking. 7. While the appliance calculates the approximate duration time, the display shows the count up time.
ENGLISH 15 Wire shelf and baking tray together: Push the baking try between the guide bars of the shelf support and the wire shelf on the guide bars above. • All accessories have small indentations at the top of the right and left side to increase safety. The indentations are also anti-tip devices. • The high rim around the shelf is a device which prevents cookware from slipping. 10. ADDITIONAL FUNCTIONS 10.
www.electrolux.com Settings menu Indicator of the setting menu Description Value to set SET1 RESIDUAL HEAT INDICATOR ON / OFF SET21) KEY TONE CLICK / BEEP / OFF SET3 FAULTY TONE ON / OFF SET4 BRIGHTNESS LOW / MEDIUM / HIGH SET5 SERVICE MENU --- SET6 RESTORE SETTINGS YES / NO 1) It is not possible to deactivate the tone of the ON / OFF sensor field. Activate the Settings menu: 1. When the appliance is deactivated, touch and hold for three seconds.
ENGLISH 17 11. CARE AND CLEANING WARNING! Refer to the Safety chapters. Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. • To clean metal surfaces, use a usual cleaning agent. • Clean the oven interior after each use. Then you can remove dirt more easily and it does not burn on. • Clean all oven accessories after each use and let them dry.
www.electrolux.com 4. The heating element folds down. You can clean the oven ceiling. Installing the heating element Install the heating element in the opposite sequence. 1. 2. 2. 3. Hold the heating element with two hands at the front. Pull it forwards against the spring pressure and out along the supports on the two sides. Install the heating element correctly above the supports on the inner walls of the appliance. Install the shelf supports. 11.
ENGLISH 2. 3. 4. 19 Clean the glass cover. Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat resistant oven lamp. Install the glass cover. Replacing the side lamp: Remove the left shelf support to get access to the lamp. 2. Use a narrow, blunt object (e.g. a teaspoon) to remove the glass cover. Clean the glass cover. 1. 3. 4. 5. Replace the lamp with a halogen, 230 V, 25 W, 300 °C heat resistant oven lamp. Install the glass cover. Install the shelf support. 12.
www.electrolux.com Problem The display shows an error code that is not in this table. Possible cause Solution There is an electronic fault. • Deactivate the appliance with the house fuse or the safety switch in the fuse box and activate it again. • If the display shows the error code again, refer to the Service Center. The appliance is activated The test mode is activaand does not heat up. ted. The fan does not operate. The display shows “Demo”. 1. 2. 3.
ENGLISH 21 13.1 Installing the oven A = appliance N = recess B A A 180 A WARNING! Installation into flammable material must agree with NIN SEV 1000 (Swiss Association of the Cantonal Fire Insurance Companies) fire protection guidelines and regulations. ca.50 A 595 N 585-592 442 1. 115 CAUTION! Make sure the cable is free when you slide the appliance. N min. 550 20 Use the side handles to hold the appliance and slide it flush into the recess. A 567 N 560-568 A 592 A 13.
www.electrolux.com B 180 A A = appliance N = recess ca.50 A N 600 WARNING! Installation into flammable material must agree with NIN SEV 1000 (Association of Cantonal Fire Insurers) fire protection guidelines and regulations. A 595 442 115 CAUTION! Make sure the cable is free when you move the appliance. N min. 550 A 567 20 N 560-568 1. Push the cooker into the recess so that it is flush with the surrounding units. 2. Use at least 2 screws to fix the appliance on both sides (Detail A).
ENGLISH 23 2 3 4 1 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm = 70 mm 1 2 3 4 14. CH GARANTIE, GARANZIA, GUARANTEE 14.1 Kundendienst, service-clientèle, Servizio clienti, Customer Service Centres Servicestellen Points de Service Servizio dopo vendita 5506 Mägenwil/Zürich Industriestrasse 10 3018 Bern Morgenstrasse 131 1028 Préver6928 Manno enges Le Trési 6 Via Violino 11 9000 St. Gallen Zürcherstrasse 204e 4052 Basel St.
www.electrolux.com Servicestellen Points de Service Servizio dopo vendita Point of Service 6020 Emmenbrücke Seetalstrasse 11 7000 Chur Comercialstrasse 19 Ersatzteilverkauf/Points de vente de rechange/Vendita pezzi di ricambio/ spare parts service: 5506 Mägenwil, Industriestrasse 10, Tel. 0848 848 111 Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita 8048 Zürich, Badenerstrasse 587, Tel. 044 405 81 11 Garantie Für jedes Produkt gewähren wir ab Verkauf bzw.
ENGLISH 25
www.electrolux.
ENGLISH 27
892934957-D-412013 www.electrolux.
