Manual

Setting Oven Controls
SE ING OVENLOCKOUTFEATURE
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The (1::1)or((_) pad controls the Oven Lockout feature. The Oven Lockout feature
automatically locks the oven door and prevents the Warmer Drawer from being turned
on. It does not disable the clock, timer or the interior oven lights.
To activate the Oven Lockout feature:
1. Press and hold _ or ('_ for 3 seconds.
2. After 3 seconds a beep will sound, "CONTROLS LOCKED" will appear and "DOOR
LOCKED" will flash on the control panel. Once the oven door islocked the "DOOR
LOCKED" indicator will stop flashing and remain on.
To reactivate Normal Oven Operation:
1. Press and hold _'_ or _ for 3 seconds. A beep will sound, "DOOR LOCKED" will
flash in the display. The "DOOR LOCKED" will continue to flash until the oven door
has completely unlocked. When the oven door is unlocked, "DOOR LOCKED" and
"CONTROLS LOCKED" will disappear from the display.
2. The oven is again fully operational.
SE_MNGTEMPERATUREDMSPLA¥--FAHRENHEMTORCELSMUS:
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The
or (,0_) and _,_) or _%_ pads control the Fahrenheit or Celsius temperatu re
display modes. The oven control can be programmed to display temperatures in
Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
Figure 1
Figure 2
Figure 3
To changedisplay from Fahrenheitto Celsius or Celsius to
Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius. Press _Ci,_or ('_
(Figure
1) and hold for 7 seconds; "550 °'' will appear in the display and a beep will
sound. If "F°'' appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C°'' appears, the display is set to show temperatures in Celsius
(Figure3).
2. Press _ or _,',) to switch between Fahrenheit or Celsius display modes. The
display will show either "F°'' (Figure 2) or "C °'' (Figure 3).
or _--_ to accept the change or press @ or @ to reject
3. Press the
change.