Manual
Table Of Contents
- Keep a Record for Quick Reference
- Before Setting Oven Controls
- Setting Oven Controls
- Wave-Touch™ Display Modes
- User Preferences
- Setting the Clock
- Setting the Clock Display
- Setting 12 or 24 Hour Display
- Changing Oven Temperature Display (°F or °C)
- Changing Between 12 Hour Energy Saving or Continuous Bake Mode Settings
- Adjusting Tone Volume
- Control Lock
- Timer
- Interior Oven Lights
- Cook Options
- Rapid Preheat
- Bake
- Convection Bake
- Convection Convert
- Cook Duration
- Setting Cook Duration with End Time
- Broil
- Recommended Broiling Times
- Convection Broil
- Convection Roast
- Meat Probe
- Setting the Probe
- Setting the Probe
- Recommended Internal Temperatures for Probe
- Setting Defrost
- Setting Dehydrate
- Setting Bread Proof
- Slow Cook
- Warm Oven
- Warm Oven Temperature Selection
- Setting Multi Stage
- Setting Multi Stage for 3 Stages
- My Favorite
- Setting the Sabbath Mode
- Canceling Sabbath Mode
- What to do after a power failure or power interruption when Sabbath mode is active
- Adjusting the Oven Temperature
- Restoring Control to Factory Default Settings
- Before Starting Clean
- Setting Clean
- Setting Delayed Clean
- Care and Cleaning
- Solutions to Common Problems
- Warranty
Setting Oven Controls 21
Meat Probe
Checking the internal temperature of your food is the most
effective way of insuring that your food has been properly
cooked. When cooking meat such as roasts, hams or poultry
you can use the probe to check the internal temperature without
any guesswork.
Your oven will automatically change from cooking to warm oven
once the probe has reached the set temperature.
The following temperature settings apply to the probe function:
• Default: 170°F (76°C)
• Minimum: 130°F (54°C)
• Maximum: 210°F (99°C)
Setting the Probe
• Always insert the probe so that the tip rests in the center of
the thickest part of the meat. Do not allow the probe to
touch bone, fat, gristle or the pan.
• For bone-in ham or lamb, insert the probe into the center of
the lowest large muscle or joint.
• For dishes such as meat loaf or casseroles, insert the
probe into the center of the food. To find the center of the
food visually measure with the probe.
• When cooking fish, insert the probe just above the gill.
• For whole poultry or turkey, insert the probe into the
thickest part of the breast (Figure 22).
IMPORTANT! Use only the probe supplied with your appliance.
Any other may result in damage to the probe or the appliance.
Be sure the probe is fully inserted into the probe receptacle. The
probe will not work properly until correctly connected
(Figure 23).
• Handle the probe carefully when inserting and removing it
from the food and the receptacle. Do not use tongs to pull
the cable when inserting or removing it from the food or the
receptacle.
• Defrost your food completely before inserting the probe to
avoid damaging probe. Never leave or store the probe
inside the oven when not in use.
• To prevent the possibility of burns, carefully unplug the
probe using a pot holder or oven mitts.
The probe receptacle is located at the top of the oven cavity as
shown in (Figure 24).
Figure 22: Components of meat probe (top) Proper
placement for poultry (bottom)
handle
probe
cable
probe
sensor
handle
probe
connector
Figure 23: Measure with probe to insert half way into meat
Figure 24: Probe receptacle top left of oven cavity
1/2
probe
receptacle