Installation guide

Installation 11

TOOLS NEEDED FOR INSTALLATION

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

• Phillips screwdriver

• Measuring tape

• Level

• Drill with 1/16" drill bit

[] [] [] [] []

STEAM BARRIERINSTALLATION

[] [] [] [] !! [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] I!

Position the steam barrier inside the top of the cut-out. Push it towards the

back wall until the back edge lines up with the back of the cabinet.

Attach it with the eight (8) provided screws.

[]

Steam Barrier

(provided)