Wine maturation cellar CS C... 825 12 20-00 110 160 200 Instruction manual .................
Operating and Installation Instructions for your Electrolux Wine Cellar Introduction Thank you for choosing the Electrolux Wine Cellar. Please read the following instructions carefully before installing your new wine cellar. We trust you will be completely satisfied with your purchase. The wine cellar must be installed and used according to these instructions in order for it to operate correctly and economically. Transit damage Inspect the wine cellar for transit damage.
ON FIG. 3 OFF 1 S1 Electrical connection. It is essential that the electrical installation is carried out correctly, taking into account all relevant regulations and codes of practice. Your wine cellar will operate on a mono-phased alternating current. Please check that the voltage shown on the data plate corresponds to your power supply. WARNING THE WINE CELLAR MUST BE EARTHED. The wine cellar is fitted with a plug intended for an earthed socket.
Note that you should store no more than one layer of bottles on the sliding shelves. Sliding shelf kit number: 921 17 81-99 Storage shelf kit number: 921 17 81-98 The sliding shelves and the storage shelves can be placed in several positions depending on the size of your wine cellar. Each kit contains two shelves and shelf supports.
Electric diagram 6
MO-FO 0223
