Specifications

3
!
Getting started
Preparing coffee
3. The machine must not be used
with empty tank! If you use it
without water for a too long time
the auto priming could be blocked.
To prime the machine again, place
a bowl (0.5 L capacity minimum)
under the coee spout (F), press the
Espresso button (B) once and run ½
water tank then press the Espresso
button again to stop.
3. To prepare coee, place a cup on
the drip tray grid (G). Lift the lever
and insert a capsule in the compart-
ment. Close the lever and press the
Espresso button (B). When the de-
sired amount of coee is reached,
press the Espresso button again to
stop. When the coee is ready, lift
the lever and the capsule falls down
into the used capsules container (J).
2. When starting the machine for
the rst time: Place a bowl (0.5 L
capacity minimum) under the cof-
fee spout (F), press the Espresso
button (B) once and run ½ water
tank then press the Espresso button
again to stop.
2. Lavazza A Modo Mio capsules.
Only suitable Lavazza A Modo Mio
capsules should be placed in the
capsule compartment (D). Lavazza
A Modo Mio capsules are single
dose capsules and brew a single
coee. DO NOT use the capsules
more than once. Inserting 2 or more
capsules can cause the machine to
malfunction.
1. Place the machine on a at sur-
face. Rinse the water tank (E) before
using it. Fill the water tank with
cold, drinkable and non-sparkling
water. (The machine must not be
used with empty tank!) Plug the
power cord into the mains and
press the ON button. The machine
is ready to use when the cup indi-
cator light (B) stops ashing and
becomes steady.
1. Adjustment of the drip tray (G/H)
height. To accommodate dierent
cup sizes, the drip tray can easily be
adjusted to 2 dierent positions or
be removed to t bigger cups.
Small Medium Large