Model # Serial # www.electrolux.
IMPORTANT SAFEGUARDS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING To reduce the risk of fire, electric shock or injury: • Do not use outdoors or on wet surfaces. • Do not block the motor hood ventilation openings and duct on the top of the power unit. Lack of ventilation airflow will cause the motor to overheat.
SAVE THESE INSTRUCTIONS Grounding Instructions This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Power Unit Location NOTE: Mount power unit at least 12 inches from the ceiling and any adjacent wall, at least 28 inches from the floor and within 6ft. of an electrical outlet. WARNING: Do not block the hood ventilation openings and duct on the top of the power unit. Lack of ventilation will cause the motor to overheat. WARNING: Do not locate the power unit in a high temperature area where it is inaccessible, for example, an attic or crawl space.
Overload-Protection Reset Button The built-in vacuum system features an overload protection (circuit breaker) which can be reset should the motor be overloaded causing the circuit to open. Should this happen and the power unit fails to operate, depress the reset button which is located on the side of the power unit. If the protector continues to trip; contact the authorized service center nearest you.
7. Install filter in power unit by locating on filter mounting ring and pressing firmly until slid in place. 8. Replace the dirt receptacle on unit. • For more thorough cleaning rinse the filter with a garden hose ONLY on the dirty side. • Rinse until filter debris is removed. WARNING: Do not use high pressure water. • Filter will be discolored. This will not affect the filters performance.
