66331KF-N User manual Ceramic glass hob
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
Contents 3 Contents Operating Instructions 4 Safety instructions 4 Description of the Appliance Cooking surface layout Control panel layout Touch Control sensor fields Displays Residual heat indicator Operating the appliance Switching the appliance on and off Setting the heat setting Switching the outside ring on and off Locking/unlocking the control panel Switching the STOP+GO function on and off Using the automatic warm-up function Using the child safety device Using the timer Automatic switch off T
Operating Instructions Operating Instructions 1 Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. Correct use • This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
Safety instructions 5 Safety during use • Overheated fats and oils can ignite very quickly. Warning! Fire hazard! • There is the risk of burns from the appliance if used carelessly. • Remove stickers and film from the glass ceramic. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. • Switch the cooking zones off after each use. Safety when cleaning • For cleaning, the appliance must be switched off and cooled down.
Description of the Appliance Description of the Appliance Cooking surface layout Single cooking zone 1200 W Triple cooking zone 800/1600/2300 W Multi-purpose zone 1500/2400 Control panel W Single cooking zone 1200 W Control panel layout Child lock with pilot light STOP+GO with pilot light Cooking zone indicators Timer function Automatic warmTimer display up function Triple ring cooking zone switch with pilot lights On/Off with power indicator Multi-purpose zone switch with pilot light Heat sett
Description of the Appliance 7 Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Description of the Appliance Displays Display / Keep Warm setting - Heat settings Automatic warm up function Fault Residual heat Child safety device Automatic switch off Description Cooking zone is switched off STOP+GO function / Keep Warm setting is set Heat setting is set Automatic warm-up function is activated Malfunction has occurred Cooking zone is still hot Child safety device is engaged Switch off is active. Residual heat indicator 1 3 Warning! Risk of burns from residual heat.
Operating the appliance 9 Operating the appliance Switching the appliance on and off Switch on Switch off 3 Control panel Touch for 1 second Touch for 1 second Display / / none Pilot light lights up goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Operating the appliance Switching the outside ring on and off 3 By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware. Before an outside ring can be switched on, the inside ring must be switched on.
Operating the appliance 11 Switching the STOP+GO function on and off The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. Control panel To switch on Touch To switch off Touch 3 3 Display heat setting that was previously set (not automatic warm up function) Timer functions are not stopped by STOP+GO. STOP+GO locks the whole control panel except the sensor field .
Operating the appliance Heat setting Length of the automatic warm up [min:sec] 1 1:00 2 1:40 3 2:40 4 4:50 5 5:30 6 6:30 7 8:10 8 10:10 9 12:20 10 11 12 13 14 2:30 2:30 3:30 4:30 ---
Operating the appliance 13 Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step Control panel 1. Switch on appliance. (Do not set a heat setting.) 2. Touch for 4 seconds The child safety device is switched on. Display/Signal Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Step Control panel Display/Signal 1.
Operating the appliance Using the timer 3 3 Function Condition Automatic cut-out a heat setting is set Countdown timer cooking zones not in use Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. If a cooking zone is switched off, the timer function set is also switched off.
Operating the appliance 15 Setting the time Step 1. Control panel Indicator Select TIMER cook- Pilot light for the cooking zone selected ing zone flashes 2. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step 1. Control panel Select TIMER cooking zone 2. Touch Indicator Pilot light of cooking zone selected flashes faster Time remaining is displayed The time remaining counts backwards to 00.
Operating the appliance Displaying the time remaining for a cooking zone Step 1. Control panel field TIMER Select cooking zone Display Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step Control panel field 1. Touch TIMER Acoustic signal stops. Acoustic signal Acoustic signal to acknowledge.
Operating the appliance 17 Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically.
Tips on Cooking and Frying Tips on Cooking and Frying 3 Information on acrylamides According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
Tips on Cooking and Frying 19 Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cookingprocess 0 1 1-3 suitable for Cooking time Tips/Hints as required Cover 5-25 mins. Stir occasionally 10-40 mins.
Cleaning and Care Cleaning and Care 1 1 Take care! Risk of burns from residual heat. Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … 21 What to do if … Problem Possible cause Remedy The cooking zones will not More than 10 seconds have Switch the appliance on again. switch on or are not function- passed since the appliance was ing switched on The child safety device is switched on Deactivate the child safety device (See the section “Child safety device”) Several sensor fields were touched at the same time Only touch one sensor field Automatic switch off has been Remove any objects (pan, triggered cloths, etc.
1 3 What to do if … Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period.
Disposal 23 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. 2 Old appliance W The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Instructions Installation Instructions 1 z z Safety instructions Warning! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Installation Instructions 25 Sticking the seal in the rabbet • Clean the rabbet in the work surface. • Stick the one-sided self-adhesive sealing tape supplied onto the upper surface of the rabbet along the edges of the cut-out section. – Cut the sealing tape into four pieces relating to the length of the edges of the rabbet. – For the four corners of the rabbet the ends of the sealing tapes must be cut into mitres. Do not stick the ends over one another.
Built-in installation Built-in installation
Built-in installation 27
Installation proud of the work surface Installation proud of the work surface
Installation proud of the work surface 29
Installation proud of the work surface
Installation proud of the work surface 31
Rating Plate 66331KF-N 55HAD56AO 949 592 897 230 V 50 Hz 7,1 kW AEG-ELECTROLUX
Guarantee/Customer Service 33 Guarantee/Customer Service European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
Guarantee/Customer Service p t b Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet királyné útja 87 Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG Alphen aan den Rijn Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo Österreich +43 18 66 400 Herziggasse 9, 1230 Wien Polska +48 22 43 47 300 ul. Kolejowa 5/7, Warszawa Portugal +35 12 14 40 39 39 Quinta da Fonte - Edificio Gonçalves Zarco - Q 35 2774 - 518 Paço de Arcos Romania +40 21 451 20 30 Str.
Service 35 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
867 200 735-M-151007-01 Subject to change without notice www.electrolux.
