FAVORIT 65011 VI User manual Dishwasher
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
Contents 3 117970140-022008 Contents Operating instructions 5 Safety information Correct use General safety Child safety Installation 5 5 6 6 6 Product description 7 Control panel Setting mode Audible signals 8 9 10 First use 10 Set the water softener Setting manually Setting electronically 11 11 12 Use of dishwasher salt 13 Use of rinse aid Adjusting the dosage of rinse aid 14 15 Daily use 15 Load cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the hei
Contents Unloading the dishwasher 26 Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine 27 27 28 28 28 29 29 29 What to do if… 29 Technical data 32 Hints for test institutes 32 Installation instructions 34 Installation Fixing to the adjacent units Levelling 34 34 34 Water connection Water supply connections Water inlet hose with safety valve Water outlet hose connection
Safety information 5 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information General safety • Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. • The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. • Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
Product description WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs.
Control panel Control panel 1 2 3 4 5 6 Digital display Delay start button Programme selection buttons Indicator lights On/Off button Function buttons Indicator lights MULTITAB Indicates the activation/deactivation of the Multitab function (see Multitab function) Salt Illuminates when the special salt has run out. 1) Rinse aid Illuminates when the rinse aid has run out.
Control panel 9 The digital display indicates: • the level of hardness to which the water softener is set, • the approximate remaining time of the running programme, • activation/deactivation of the rinse aid dispenser (ONLY with Multitab function active), • the end of a washing programme (a zero will appear in the digital display), • the countdown of the delay start, • fault codes concerning malfunction of the dishwasher, • activation/deactivation of the audible signals.
First use Audible signals Audible signals have been introduced to help indicate which operations the appliance is performing: • setting the water softener • end of the programme • intervention of an alarm due to malfunction. Factory setting: audible signals activated. It is possible to deactivate the audible signals, using the function buttons. 1. Press the On/Off button. The appliance must be in setting mode. 2.
Set the water softener 11 Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).
Set the water softener 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness dial to position 1 or 2 (see table). 4. Replace the lower basket. Setting electronically The dishwasher is factory set at level 5. 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing. 3.
Use of dishwasher salt 13 Use of dishwasher salt WARNING! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1.
Use of rinse aid Use of rinse aid WARNING! Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse. 1. Open the container by pressing the release button (A). 2. Add the rinse aid in the container.
Daily use 15 Adjusting the dosage of rinse aid According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.
Load cutlery and dishes • When loading the dishes and cutlery, please note: – Dishes and cutlery must not impede the rotation of the spray arms. – Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base. – Dishes and items of cutlery must not lie inside one another, or cover each other. – To avoid damage to glasses, they must not touch. – Lay small objects in the cutlery basket.
Load cutlery and dishes 17 The lower basket Load larger and heavily soiled dishes and pans in the lower basket. To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be folded down. The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. Long and/ or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
Load cutlery and dishes 1. Place the grid insert on the cutlery basket. 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the two-part handle when removing it from the dishwasher. 1. Place the cutlery basket on a table or work surface. 2. Open out the two-part handle. 3. Remove cutlery.
Load cutlery and dishes The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall crockery items. • Lay or hang wine and brandy glasses in the slots in the cup racks.
Use of detergent 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically. The upper basket will latch into the lower or the upper position. WARNING! After loading your machine always close the door, as an open door can be a hazard. Before closing the door, ensure that the spray arms can rotate freely. Use of detergent Only use detergents specifically designed for use in dishwashers.
Multi-tab function 21 2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will take effect during the prewash phase. 4. When using detergent tablets, place the tablet in compartment (1) 5. Close the lid and press until it locks in place.
Multi-tab function is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. Select the "Multitab function " before the start of a washing programme. Once this function is selected (indicator light illuminated) it will remain active also for the following washing programmes. With the use of the "Multitab function", the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated.
Washing programmes 23 = Rinse aid dispenser activated. 4. To change the setting, press button B again, the digital display indicates the new setting. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". 2. Fill up the salt container and the rinse aid dispenser again. 3.
1,0 - 1,1 12 - 13 Any Partial load (to be completed later in the day) 0,1 4 Water (litres) Crockery and cutlery Energy (kWh) Normal soil 150 - 160 Consumption values 1) Duration (minutes) ECO 50°4) Drying Programme description Final rinse Type of load Intermediate rinse Degree of soil Main wash Programme 12 Select and start a washing programme Prewash 24 5) 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the
Select and start a washing programme 25 4. Press the button corresponding to the required programme (see "Washing programmes" chart). Close the dishwasher door, the programme starts automatically. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours. 2.
Unloading the dishwasher Interrupt a washing programme in progress • Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. End of the washing programme • The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. • When the washing programme has ended, the optical signal on the floor beneath the dishwasher's door will turn off. 1. Open the dishwasher door.
Care and cleaning 27 Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. WARNING! Before cleaning the filters ensure that the machine is switched off. 1. Open the door, remove the lower basket. 2. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 3.
Care and cleaning 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. 7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. 8. Place the coarse filter (A) in the microfilter (B) and press together. 9. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment.
What to do if… 29 Prolonged periods of non-operation If you are not using the machine for any prolonged period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. Leave the inside of the machine clean. Frost precautions Avoid placing the machine in a location where the temperature is below 0°C.
What to do if… Fault code and malfunction Possible cause and solution • continuous flashing of the light of the running programme • point-shaped optical signal is flashing • appears in the digital display. • The water tap is blocked or furred with limescale. • intermitted audible signal The dishwasher does not fill with water. Clean the water tap. • The water tap is turned off. Turn the water tap on. • The filter (where present) in the threaded hose fitting at the water inlet valve is blocked.
What to do if… 31 Once these checks have been carried out, switch on the appliance: the programme will continue from the point at which it was interrupted. If the malfunction or fault code reappears contact the Service Force Centre. For other fault codes not described in the above chart, please contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the side of the dishwasher door.
Technical data If after all these checks, the problem persists, contact your local Service Force Centre.
Hints for test institutes Lower basket with cutlery basket Cutlery basket 1) If there are cup racks in place on the lefthand side, remove them.
Installation Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface.
Water connection 35 Water connection Water supply connections Connection to a cold water supply is advised. If connection is made to a hot water supply the maximum permissible temperature is 60°C. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.
Water connection • The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. • If water inlet hose or the safety valve is damaged, remove the mains plug immediately. • A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. WARNING! Warning! Dangerous voltage. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1.
Electrical connection 37 The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed.
Environment concerns Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.electrolux.com 117970140-022008 To buy accessories, consumables and spare parts at our online shop please visit: www.aeg-electrolux.co.