Owner's Guide

19
Operating Instructions
If more than one user has been entered in CUSTOM
MODE:
The current user’s name will be displayed when the •
washer is turned on if CUSTOM MODE is on.
Press the button under • OK to continue using that
user’s favorite cycles.
The icon for the last cycle run will light up.•
Turn the cycle selector knob to • favorites/specialty.
Press the button under the LCD corresponding to •
my favorites to display the favorites cycles.
Select one of the 3 customized cycles by pressing •
the corresponding button.
Press the • start button.
To change users:
Press the • select button when the washer turns on
and shows the current user’s name.
Press the button under • change users.
Select another user’s name.•
Press the button under • EXIT.
The icon for the last cycle run will light up. •
Turn the cycle selector knob to • favorites/specialty.
Press the button under the LCD corresponding to •
my favorites to display the favorites cycles.
Select one of the 3 customized cycles by pressing •
the corresponding button.
Press the • start button.
To select a user if a user’s name is not displayed
when the washer is turned on:
Press the • options buttons to scroll to set prefs and
then press the select button.
If necessary, press the • options buttons to scroll to
CUSTOM MODE and then press the select button.
Press the button corresponding to the user’s name.•
The icon for the last cycle run will light up.•
Turn the cycle selector knob to • favorites/specialty.
Press the button under the LCD corresponding to •
my favorites to display the favorites cycles.
Select one of the 3 customized cycles by pressing •
the corresponding button.
Press the • start button.
(See CUSTOM MODE in “Operating User Interface
Preferences” in this guide for instructions entering
new users and naming favorite cycles.)
MY FAVORITES , continued