Owner's Guide

29
See the example below to set the probe target
temperature to 180°F/82°C when using the
convection roast feature with oven set temperature
for 325°F/162°C.
Setting the probe
* You may skip steps 7-9 if you choose to use the
default internal target temperature of 170°F for the
probe.
Bythedefault,yourovenwilladjusttothekeep
warm setting once the probe has reached the set
temperature.
Example
Step Press
1. Insert the probe into the food and place the
food into the oven -Fig. 1-.
2. Plug the probe COMPLETELY into the probe
receptacle inside the oven -Fig. 2-
and close
the oven door.
3. PressUPPEROVEN
UPPER
OVEN
4. PressCONVROAST
5. Enter 325
6. PressSTART
7. PressPROBEtwo times.
8. Enter 180
9. PressSTART
Setting Oven Controls
NOTE
When the meat probe is connected to the •
receptacle and a cooking function is started,
the display will show the current temperature
reported by the meat probe.
Any time during the cooking process you •
may press to see or modify the target
temperature.