Owner's Guide
14
Figure 2
Thecooktopisequippedwithdifferentsized
burners.
The surface burners are located on the cooktop as
follows (See Figure):
- a 5000BTU(natural gas) burner located at the
right rear position;
- a 18000BTU(natural gas) burner located at
the right front position;
- a 9500BTU(natural gas) burner located at the
left front position;
- a 16000BTU(natural gas) burner located at
the left rear position;
- a 9500BTU(natural gas) burner located at the
center position.
Forthe18000BTUburner:
Placetheburnerheadoverthegasorice(Figure
2). Becarefulnottodamagetheelectrodewhile
placingtheburnerheadovertheorice.Make
sureelectrodetscorrectlyintoslotinburnerhead.
Forallburners:
Place a burner cap on each burner head (see
Figure1),matchingthecapsizetotheheadsize.
The cap for each burner has an inner locating
ring which centers the cap correctly on the burner
head.Besurethatalltheburnercapsandburner
headsarecorrectlyplacedBEFOREusingyour
appliance.
Makesureeachburnercapisproperlyalignedand
level.
Turn the burner on to determine if it will light. If the
burnerdoesnotlight,contactaServiceCenter.Do
not service the sealed burner yourself.
Thecoloroftheameisthekeytoproperburner
adjustment.Agoodameisclear,blueandhardly
visibleinawell-lightedroom.Eachconeofame
shouldbesteadyandsharplydened.Adjustor
cleanburnerifameisyellow-orange.Toclean
burner, see instructions under General Care &
Cleaning.
Figure 1
Burner
Cap
BurnerHead
Burner
Cap
Burner
Head
Gas
Opening
Electrode
Surface Cooking
Locations of the burners Placement of burner heads
and caps
Proper burner adjustments