Owner's Guide
15
SETTING CLOCK AT POWER UP
When the unit is rst plugged in, or when the power supply to the range has been interrupted,
the timer in the display will ash with "". The clock cannot be set when the oven is on. If
an invalid time of day is entered, the control will triple beep to prompt you to re-enter a valid
time of day.
To set the clock (example for 1:30):
1. Press
1
3
0
pads to set the time of day to 1:30. The pads
+
hi
or
-
lo
can also be pressed
to raise or lower the actual time displayed.
2. Press START to accept the changes or to start with a time of 12:00.
TEMPERATURE VISUAL DISPLAY
Your oven is equipped with a temperature visual display for each oven. When a cooking mode
is set, the actual temperature will be shown in the display and will rise as the unit preheat.
When the unit has reached its target temperature, a chime will sound to remind you to place
the food in the oven. This feature will be active with some cooking modes; bake, convection
bake and convection roast. The cooking modes which does not feature the temperature visual
display will be noted in their descriptions.
NOTE: The lowest temperature that can be displayed is 100°F.