REFRIGERATOR 160 LA INSTRUCTION BOOK 1347163 A/O/8-3. (02.
This instruction book contains safety precautions, information on use and helpful hints and tips. To ensure you use this appliance effectively and safely, please read this instruction book carefully before installing or using the appliance and retain it for future reference. The symbols below help you to find things more easily: Safety precautions Warnings and safety information. Hints and useful information Environmental information Ideas This symbol indicates information regarding food and its storage.
IMPOR TANT S AFET Y INF ORMATION These warnings are provided in the interest of your safety. Ensure that you understand them all fully before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department. Prior to installation Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.
Cont ents Instructions for the User Instructions for the Installer Guide to use the Instruction Book 2 Important Safety Information 3 Description of the Appliance 5 Using the Appliance Before first use To start the appliance Thermostat control Normal operating sounds Defrosting 6 6 6 6 6 6 Useful information and advice 7 Storage time chart 8 Maintenance & Cleaning 9 Something Not Working 10 Service & Spare Parts 11 Guarantee Conditions 12 4 Technical data 13 Installing the appliance
Ins tr uctions f or the User General information This appliance is designed for the refrigeration of food in a domestic home. To ensure correct operation, the appliance should be located where the ambient temperature is between 10-32 °C. Description of the appliance 1. 2. 3. 4. 5. 6. 7. 8. 9. Wire shelf Defrost water outlet Glass shelf Salad bin Rating plate Adjustable feet Butter compartment Thermostat control and interior light Door gasket 10. 11. 12. 13. 14. 15. 16. 17.
Using the appliance Before first use Remove all securing tapes. Wash the inside of the appliance with lukewarm water to which a little bicarbonate of soda has been added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly. Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or products containing alcohol. To start the appliance 1. Allow the appliance to stand for 2 hours after installation. 2.
Useful inf or mation and advice Hints for storage To obtain the best performance, do not store warm food or evaporating liquids in the refrigerator; do cover or wrap the food, particularly if it has a strong flavour. Do not cover the shelves with any protective material, such as paper, cardboard or plastic, which may obstruct air circulation through them. Below is the recommended storage positions for various food types: 1. Ready cooked foods, convenience foods, fresh meat, cold cuts 2.
S t or age time char t Time and method of storage of fresh foods in the refrigerator Foods Raw meat Cooked meat Roasted meat Raw minced meat Roasted minced meat Cold cuts Fresh fish Cooked fish Tinned fish, open Fresh chicken Fried chicken Fresh duck, goose Roasted duck, goose Butter unopened Butter opened Milk Cream Sour cream Cheese (hard) Cheese (soft) Egg Spinach, sorrel Green peas, green beans Mushroom Carrot Tomato Cabbage Strawberry, raspberry, etc.
Maint enance and Cleaning Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. Internal Cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED CLEANING PRODUCTS OR WAX POLISHES TO CLEAN THE APPLIANCE INTERIOR AS THESE WILL DAMAGE THE SURFACE AND LEAVE A STRONG SMELL.
Some thing N o t Wor king? Before contacting your local Service Force Centre, please check the following points. Symptom No power to the appliance. The light does not come on. The temperature in the appliance is too high. Possible Cause No power at the socket. There is a power cut. The fuse has blown. Thermostat control is set at 0. The bulb is not fitted correctly. The bulb has blown. The appliance is located in an unsuitable position. The thermostat control is set too low.
Ser vice & Spar e P ar ts If your appliance requires servicing or you wish to purchase spare parts please contact your local Electrolux Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre which covers your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.
Guar ant ee Conditions Standard guarantee conditions We, Onyx, undertake that if within 12 months of the date of purchase this Onyx appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply sated on the rating plate.
INS TR UCTIONS FOR THE INS TALLER TECHNICAL DATA DIMENSIONS WEIGHT GROSS CAPACITY: NET CAPACITY: POWER SUPPLY VOLTAGE & FREQUENCY TOTAL POWER ABSORBED ENERGY CONSUMPTION: PER DAY PER YEAR ENERGY CLASS (According to EU standards) INSTALLING THE APPLIANCE Height 850 mm Width 550 mm Depth 600 mm 34 KG 159 l 148 l 220-240 V / 50 Hz 100 W 0.60 kWh 219 kWh C Location Transportation and unpacking The appliance should be positioned in a well ventilated, dry room.
VENTILATION REQUIREMENTS The appliance must have adequate ventilation to ensure correct operation. The diagram shows the ventilation requirements when installed: A* Under a worktop or cupboard B freestanding * The clearance space of 10cm above the appliance may be reduced to 5cm providing a clearance space of 2.5cm is left either side of the appliance. LEVELLING The appliance MUST be level. Level the appliance by adjusting the two adjustable feet (1) at the front of the appliance.
Rotate the hinge assembly 180° and insert the hinge assembly into the opposite location. Refit the 2 hinge plate retaining screws. Relocate the worktop and refit the worktop retaining screws. To reverse the handle proceed as follows: Remove screw covers (if fitted) and handle retaining screws. Remove blanking plugs on the opposite side. Relocate the handle to the opposite side and refit retaining screws (and covers if fitted), and replace the blanking plugs.
The wire coloured blue must be connected to the terminal N or coloured black. The wire coloured brown must be connected to the terminal marked L or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Ensure that the cut off plug is disposed of safely as there is a danger of an electric shock if it is plugged into another part of your home. This appliance complies with the following E.E.C.
