User manual

Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control panel
with the same precautions.
9.1 Cleaning the door gasket
• Regularly do a check of the door gas-
ket. The door gasket is around the
frame of the oven cavity. Do not use the
appliance if the door gasket is dam-
aged. Contact the Service Centre.
• To clean the door gasket, refer to the
general information about cleaning.
9.2 Aqua cleaning
The Aqua cleaning procedure uses steam
to help remove remaining fat and food
particles from the oven.
1. Put 300 ml of water into the Aqua
cleaning container at the bottom of the
oven.
2.
Set the oven function
.
3.
Set the temperature to 90 °C.
4. Let the appliance operate for 30 mi-
nutes.
5. Deactivate the appliance and let it cool
down.
6. When the appliance is cool, clean the
inner surfaces of the oven with a cloth.
WARNING!
Make sure that the appliance is
cool before you touch it. There is
a risk of burns.
9.3 Oven lamp
WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Always hold the halogen lamp
with a cloth to prevent grease res-
idue from burning on the lamp.
1.
Turn the glass cover counterclock-
wise to remove it.
2.
Clean the glass cover.
3.
Replace the oven light bulb with an
applicable 300 °C heat-resistant oven
light bulb.
Use the same oven lamp type.
4.
Install the glass cover.
9.4 Cleaning the oven door
The oven door has two glass panels. You
can remove the oven door and the inter-
nal glass panel to clean it.
The oven door can close if you try
to remove the internal glass panel
before you remove the oven door.
12
www.electrolux.com