Datasheet

Page 3
SGB can be applied by one of the following methods (although this list is not exhaustive):
Manually by way of a syringe or aerosol (SGB200D)
Semi-automated using syringe dispensing
Fully automated by way of a follower/pusher plate with dispensing system
In production processes, contact lubricant should be applied to the contact components as soon as possible
after manufacture or plating to protect against handling contamination and tarnishing.
Typical Product Applications
SGB can be used on all types of electrical contacts and with most types of thermoplastics. A small area should
be tested first to ensure compatibility.
SGB is a non-melting product that will not migrate from vertical surfaces and will provide greater environmental
protection than the oil. Thus the grease is preferable in industrial applications where heavy arcing is common.
For example: battery terminals, knife switches, rheostats etc. The grease is also preferable in switches with a
very long lifetime and high cycle rate, for example, the automotive switching industry.
Revision 4: July 2016