Datasheet

Revision date: 6/02/2019 Revision: 1.1
Silicone Resin SC4003E, Part A
Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible. Provide adequate ventilation.
Large Spillages: If ventilation is inadequate, suitable respiratory protection must be worn.
Environmental exposure
controls
Not regarded as dangerous for the environment.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance Liquid.
Colour Black.
Odour Not known.
Odour threshold Not available.
pH Not available.
Melting point Not available.
Initial boiling point and range Not available.
Flash point Not available.
Evaporation rate Not available.
Evaporation factor Not available.
Flammability (solid, gas) Not available.
Flammability Limit - Lower(%) Not available.
Other flammability Not available.
Vapour pressure Not available.
Vapour density Not available.
Relative density Not available.
Bulk density 1.4 kg/l
Solubility(ies) Not available.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity 3500-4000 mPa s @ 23°C
Explosive properties Not considered to be explosive.
Oxidising properties Does not meet the criteria for classification as oxidising.
SECTION 10: Stability and reactivity
Reactivity See the other subsections of this section for further details.
Stability Stable at normal ambient temperatures and when used as recommended. Stable under the
prescribed storage conditions.
5/
9