Datasheet

ManualsBrandsElectrolube ManualsChemicalsSilicone Resin 125g

Revision date: 6/02/2019 Revision: 1.1

SAFETY DATA SHEET

Silicone Resin SC4003E, Part A

According to Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice, February 2016

SECTION 1: Identification: Product identifier and chemical identity

Product identifier

Product name Silicone Resin SC4003E, Part A

Product No. SC4003E A, ESC4003ERP250G, ESC4003EK5K, ESC4003EK20K, ZE

Relevant identified uses of the substance or mixture and uses advised against

Application Resin.

Uses advised against No specific uses advised against are identified.

Details of the supplier of the safety data sheet

Supplier ELECTROLUBE. A division of HK WENTWORTH LTD

H K WENTWORTH PTY LIMITED

P.O. BOX 7336

WARRINGAH MALL

BROOKVALE, NSW 2100

AUSTRALIA

SYNERGY ELECTRONICS LTD

39 RICHARD PEARSE DRIVE

AIRPORT OAKS

AUCKLAND 3045

AUSTRALIA TEL: +61 (0) 2 9938 1566, FAX: +61 (0) 2 9938 1467

NEW ZEALAND TEL: +64 (0) 9 836 6588, FAX +64 (0) 9 836 9169

sales@hkwentworth.com.au

Emergency telephone number

Emergency telephone IN CASE OF EMERGENCY CALL:

+61 2 8014 4558 (Australia) (24hr, Provided by Carechem 24)

+64 9 929 1483 (New Zealand) (24hr, Provided by Carechem 24)

SECTION 2: Hazard(s) identification

Classification of the substance or mixture

Physical hazards Not Classified

Health hazards Not Classified

Environmental hazards Not Classified

Label elements

Hazard statements NC Not Classified

Other hazards

This product does not contain any substances classified as PBT (persistent, bioaccumulative and toxic) or vPvB (very

persistent and very bioaccumulative).

Summary of content (9 pages)

PAGE 1
Revision date: 6/02/2019 Revision: 1.1 SAFETY DATA SHEET Silicone Resin SC4003E, Part A According to Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice, February 2016 SECTION 1: Identification: Product identifier and chemical identity Product identifier Product name Silicone Resin SC4003E, Part A Product No. SC4003E A, ESC4003ERP250G, ESC4003EK5K, ESC4003EK20K, ZE Relevant identified uses of the substance or mixture and uses advised against Application Resin.
PAGE 2
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A SECTION 3: Composition and information on ingredients Mixtures Quartz (SiO2) 30-60% CAS number: 14808-60-7 Classification Not Classified The full text for all hazard statements is displayed in Section 16. SECTION 4: First aid measures Description of first aid measures General information Get medical attention if any discomfort continues. Show this Safety Data Sheet to the medical personnel.
PAGE 3
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A Special hazards arising from the substance or mixture Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up. Hazardous combustion products Thermal decomposition or combustion products may include the following substances: Harmful gases or vapours. Advice for firefighters Protective actions during firefighting Avoid breathing fire gases or vapours. Evacuate area.
PAGE 4
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A Advice on general occupational hygiene Wash promptly if skin becomes contaminated. Take off contaminated clothing and wash before reuse. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Wash at the end of each work shift and before eating, smoking and using the toilet. Change work clothing daily before leaving workplace.
PAGE 5
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk assessment indicates inhalation of contaminants is possible. Provide adequate ventilation. Large Spillages: If ventilation is inadequate, suitable respiratory protection must be worn. Environmental exposure controls Not regarded as dangerous for the environment.
PAGE 6
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A Possibility of hazardous reactions No potentially hazardous reactions known. Conditions to avoid There are no known conditions that are likely to result in a hazardous situation. Materials to avoid No specific material or group of materials is likely to react with the product to produce a hazardous situation. Hazardous decomposition products Does not decompose when used and stored as recommended.
PAGE 7
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A General information No specific health hazards known. The severity of the symptoms described will vary dependent on the concentration and the length of exposure. Inhalation Prolonged inhalation of high concentrations may damage respiratory system. Ingestion Gastrointestinal symptoms, including upset stomach. Fumes from the stomach contents may be inhaled, resulting in the same symptoms as inhalation.
PAGE 8
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A Not applicable. UN proper shipping name Not applicable. Transport hazard class(es) No transport warning sign required. Packing group Not applicable. Environmental hazards Environmentally hazardous substance/marine pollutant No. Special precautions for user Not applicable. Transport in bulk according to Not applicable.
PAGE 9
Revision date: 6/02/2019 Revision: 1.1 Silicone Resin SC4003E, Part A This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or completeness.