Datasheet
Revision date: 6/02/2019 Revision: 1.1
Silicone Resin SC4003E, Part B
STOT - single exposure Not classified as a specific target organ toxicant after a single exposure.
Specific target organ toxicity - repeated exposure
STOT - repeated exposure Not classified as a specific target organ toxicant after repeated exposure.
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
General information The severity of the symptoms described will vary dependent on the concentration and the
length of exposure.
Inhalation Prolonged inhalation of high concentrations may damage respiratory system.
Ingestion Gastrointestinal symptoms, including upset stomach. Fumes from the stomach contents may
be inhaled, resulting in the same symptoms as inhalation.
Skin Contact Prolonged contact may cause dryness of the skin.
Eye contact Irritating to eyes.
Route of exposure Ingestion Inhalation Skin and/or eye contact
Target Organs No specific target organs known.
SECTION 12: Ecological information
Ecotoxicity Not regarded as dangerous for the environment. However, large or frequent spills may have
hazardous effects on the environment.
Toxicity Based on available data the classification criteria are not met.
Persistence and degradability
Persistence and degradability The degradability of the product is not known.
Bioaccumulative potential
Bioaccumulative Potential No data available on bioaccumulation.
Partition coefficient Not available.
Mobility in soil
Mobility No data available.
Other adverse effects
Other adverse effects None known.
SECTION 13: Disposal considerations
Waste treatment methods
General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycle
products wherever possible. This material and its container must be disposed of in a safe
way. Disposal of this product, process solutions, residues and by-products should at all times
comply with the requirements of environmental protection and waste disposal legislation and
any local authority requirements. When handling waste, the safety precautions applying to
handling of the product should be considered. Care should be taken when handling emptied
containers that have not been thoroughly cleaned or rinsed out. Empty containers or liners
may retain some product residues and hence be potentially hazardous.
8/
10