Datasheet

ManualsBrandsElectrolube ManualsChemicalsResin Remover Solvent

Revision date: 25/05/2017 Revision: 0

SAFETY DATA SHEET

Resin Remover Solvent

According to Regulation (EC) No 1907/2006, Annex II, as amended.Commission Regulation (EU) No 2015/830 of

28 May 2015.

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name Resin Remover Solvent

Product number RRS, ERRS05L, ZE

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses Cleaning agent.

Uses advised against No specific uses advised against are identified.

1.3. Details of the supplier of the safety data sheet

Supplier

ELECTROLUBE. A division of HK WENTWORTH LTD

ASHBY PARK, COALFIELD WAY,

ASHBY DE LA ZOUCH, LEICESTERSHIRE LE65 1JR

UNITED KINGDOM

+44 (0)1530 419600

+44 (0)1530 416640

info@hkw.co.uk

1.4. Emergency telephone number

Emergency telephone +44 1865 407333

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (EC 1272/2008)

Physical hazards Flam. Liq. 2 - H225

Health hazards Eye Irrit. 2 - H319 STOT SE 3 - H336

Environmental hazards Not Classified

2.2. Label elements

Pictogram

Signal word Danger

Hazard statements H225 Highly flammable liquid and vapour.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

Summary of content (12 pages)

PAGE 1
Revision date: 25/05/2017 Revision: 0 SAFETY DATA SHEET Resin Remover Solvent According to Regulation (EC) No 1907/2006, Annex II, as amended.Commission Regulation (EU) No 2015/830 of 28 May 2015. SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Resin Remover Solvent Product number RRS, ERRS05L, ZE 1.2. Relevant identified uses of the substance or mixture and uses advised against Identified uses Cleaning agent.
PAGE 2
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Precautionary statements P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
PAGE 3
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Inhalation Remove affected person from source of contamination. Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Maintain an open airway. Loosen tight clothing such as collar, tie or belt. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Place unconscious person on their side in the recovery position and ensure breathing can take place.
PAGE 4
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Hazardous combustion products Thermal decomposition or combustion products may include the following substances: Harmful gases or vapours. 5.3. Advice for firefighters Protective actions during firefighting Avoid breathing fire gases or vapours. Evacuate area. Keep upwind to avoid inhalation of gases, vapours, fumes and smoke. Ventilate closed spaces before entering them.
PAGE 5
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent 7.1. Precautions for safe handling Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described in Section 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs. Handle all packages and containers carefully to minimise spills. Keep container tightly sealed when not in use. Avoid the formation of mists. The product is flammable.
PAGE 6
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Appropriate engineering controls Provide adequate ventilation. Personal, workplace environment or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Use process enclosures, local exhaust ventilation or other engineering controls as the primary means to minimise worker exposure.
PAGE 7
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Flash point Not available. Evaporation rate Not available. Evaporation factor Not available. Flammability (solid, gas) Not available. Upper/lower flammability or explosive limits Not available. Other flammability Not available. Vapour pressure Not available. Vapour density Not available. Relative density Not available. Bulk density 0.950 kg/l Solubility(ies) Not available. Partition coefficient Not available.
PAGE 8
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity - oral Notes (oral LD₅₀) Based on available data the classification criteria are not met. Acute toxicity - dermal Notes (dermal LD₅₀) Based on available data the classification criteria are not met. Acute toxicity - inhalation Notes (inhalation LC₅₀) Based on available data the classification criteria are not met.
PAGE 9
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Skin contact Prolonged contact may cause dryness of the skin. Eye contact Irritating to eyes. Route of entry Ingestion Inhalation Skin and/or eye contact Target organs Central nervous system Acetone Acute toxicity - oral Acute toxicity oral (LD₅₀ mg/kg) 5,800.0 Species Rat ATE oral (mg/kg) 5,800.0 Acute toxicity - inhalation Acute toxicity inhalation (LC₅₀ vapours mg/l) 76.0 Species Rat ATE inhalation (vapours mg/l) 76.
PAGE 10
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycle products wherever possible. This material and its container must be disposed of in a safe way. Disposal of this product, process solutions, residues and by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any local authority requirements.
PAGE 11
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent ADR/RID packing group II IMDG packing group II ADN packing group II ICAO packing group II 14.5. Environmental hazards Environmentally hazardous substance/marine pollutant No. 14.6. Special precautions for user Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
PAGE 12
Revision date: 25/05/2017 Revision: 0 Resin Remover Solvent Abbreviations and acronyms used in the safety data sheet ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road. ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways. RID: European Agreement concerning the International Carriage of Dangerous Goods by Rail. IATA: International Air Transport Association.