Safety data sheet
SAFERINSE 2000
Process conditions
Use engineering controls to reduce air contamination to permissible exposure level. Provide eyewash station.
Engineering measures
Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit
is not exceeded.
Respiratory equipment
In case of inadequate ventilation and work of brief duration, use suitable respiratory equipment. Use respiratory equipment
with combination filter, type A2/P3. EN14387
Hand protection
Use suitable protective gloves if risk of skin contact. The most suitable glove must be chosen in consultation with the
gloves supplier, who can inform about the breakthrough time of the glove material. Nitrile gloves are recommended. Gloves
should conform to EN374
Eye protection
Wear approved chemical safety goggles where eye exposure is reasonably probable. EN166
Other Protection
Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.
Hygiene measures
Wash hands at the end of each work shift and before eating, smoking and using the toilet. Use appropriate skin cream to
prevent drying of skin. When using do not eat, drink or smoke. DO NOT SMOKE IN WORK AREA!
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance
Aerosol. Liquid
Colour
Colourless.
Odour
Characteristic.
Solubility
Soluble in water.
Initial boiling point and boiling range
(°C)
>100 (>212 F)
Melting point (°C)
>0 (>32 F)
Relative density
0.973 20°C (68 F)
Vapour pressure
2.35 kPa
pH-Value, Conc. Solution
4-5
9.2. Other information
None.
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions.
10.3. Possibility of hazardous reactions
Not determined.
Hazardous Polymerisation
Will not polymerise.
10.4. Conditions to avoid
Avoid heat, flames and other sources of ignition. Avoid contact with acids and alkalis.
10.5. Incompatible materials
Materials To Avoid
Strong oxidising substances.
7
4
/