Datasheet

Revision date: 19/10/2016 Revision: 0
Epoxy Resin ER2223, part A
Environmental exposure
controls
Keep container tightly sealed when not in use. Emissions from ventilation or work process
equipment should be checked to ensure they comply with the requirements of environmental
protection legislation. In some cases, fume scrubbers, filters or engineering modifications to
the process equipment will be necessary to reduce emissions to acceptable levels.
SECTION 9: Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
Appearance Liquid.
Colour Black.
Odour Characteristic.
pH Not available.
Melting point Not available.
Initial boiling point and range Not available.
Flash point Not available.
Evaporation rate Not available.
Flammability (solid, gas) Not applicable.
Upper/lower flammability or
explosive limits
Not available.
Vapour pressure Not available.
Vapour density Not available.
Relative density 1.15 @ 20°C/68°F
Solubility(ies) Not available.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity 600-1000 mPa s @ 23°C/73.4°F
Explosive properties Not considered to be explosive.
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stability Stable at normal ambient temperatures and when used as recommended. Stable under the
prescribed storage conditions.
10.3. Possibility of hazardous reactions
Possibility of hazardous
reactions
No potentially hazardous reactions known.
10.4. Conditions to avoid
7/
14