Datasheet
Table Of Contents
- SECTION 1: Identification of the substance/mixture and of the company/undertaking
- SECTION 2: Hazards identification
- SECTION 3: Composition/information on ingredients
- SECTION 4: First aid measures
- SECTION 5: Firefighting measures
- SECTION 6: Accidental release measures
- SECTION 7: Handling and storage
- SECTION 8: Exposure Controls/personal protection
- SECTION 9: Physical and Chemical Properties
- SECTION 10: Stability and reactivity
- SECTION 11: Toxicological information
- SECTION 12: Ecological Information
- SECTION 13: Disposal considerations
- SECTION 14: Transport information
- SECTION 15: Regulatory information
- SECTION 16: Other information

Revision date: 19/10/2016 Revision: 0
Epoxy Resin ER2223, part A
Personal precautions No action shall be taken without appropriate training or involving any personal risk. Keep
unnecessary and unprotected personnel away from the spillage. Wear protective clothing as
described in Section 8 of this safety data sheet. Follow precautions for safe handling
described in this safety data sheet. Wash thoroughly after dealing with a spillage. Ensure
procedures and training for emergency decontamination and disposal are in place. Do not
touch or walk into spilled material. Avoid contact with skin and eyes.
6.2. Environmental precautions
Environmental precautions Avoid discharge into drains or watercourses or onto the ground. Avoid discharge to the
aquatic environment. Large Spillages: Inform the relevant authorities if environmental pollution
occurs (sewers, waterways, soil or air).
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Wear protective clothing as described in Section 8 of this safety data sheet. Clear up spills
immediately and dispose of waste safely. Approach the spillage from upwind. Small Spillages:
If the product is soluble in water, dilute the spillage with water and mop it up. Alternatively, or
if it is not water-soluble, absorb the spillage with an inert, dry material and place it in a suitable
waste disposal container. Large Spillages: If leakage cannot be stopped, evacuate area.
Flush spilled material into an effluent treatment plant, or proceed as follows. Contain and
absorb spillage with sand, earth or other non-combustible material. Place waste in labelled,
sealed containers. Clean contaminated objects and areas thoroughly, observing
environmental regulations. The contaminated absorbent may pose the same hazard as the
spilled material. Flush contaminated area with plenty of water. Wash thoroughly after dealing
with a spillage. Dangerous for the environment. Do not empty into drains. Dispose of waste to
licensed waste disposal site in accordance with the requirements of the local Waste Disposal
Authority.
6.4. Reference to other sections
Reference to other sections For personal protection, see Section 8. See Section 11 for additional information on health
hazards. See Section 12 for additional information on ecological hazards. For waste disposal,
see Section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described in
Section 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs.
Handle all packages and containers carefully to minimise spills. Keep container tightly sealed
when not in use. Avoid the formation of mists. Avoid discharge to the aquatic environment. Do
not handle until all safety precautions have been read and understood. Do not handle broken
packages without protective equipment. Do not reuse empty containers.
Advice on general
occupational hygiene
Wash promptly if skin becomes contaminated. Take off contaminated clothing. Wash
contaminated clothing before reuse. Do not eat, drink or smoke when using this product.
Wash at the end of each work shift and before eating, smoking and using the toilet. Change
work clothing daily before leaving workplace.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions Store in accordance with local regulations. Keep only in the original container. Keep container
tightly closed, in a cool, well ventilated place. Keep containers upright. Protect containers from
damage. Bund storage facilities to prevent soil and water pollution in the event of spillage. The
storage area floor should be leak-tight, jointless and not absorbent.
Storage class Miscellaneous hazardous material storage.
7.3. Specific end use(s)
5/
14










