Safety data sheet

Report Date : 29/10/2013
BLOC LUBE RED
8.1. Control parameters
STD STEL - 15 MinTWA - 8 Hrs
Name
Notes
150 ppm 724 mg/m3WEL 200 ppm 966 mg/m3
BUTYL ACETATE -norm
200 ppmWEL 400 ppm
ETHYL ACETATE
WEL = Workplace Exposure Limit.
Ingredient Comments
WEL = Workplace Exposure Limits
BUTYL ACETATE -norm (CAS: 123-86-4)
DNEL
Industry Inhalation. Long Term Systemic Effects 480 mg/m3
Industry Inhalation. Short Term Systemic Effects 960 mg/m3
Consumer Inhalation. Short Term Systemic Effects 859.7 mg/m3
Consumer Inhalation. Long Term Systemic Effects 102.34 mg/m3
Consumer Inhalation. Long Term Local Effects 102.34 mg/m3
Industry Inhalation. Long Term Local Effects 480 mg/m3
Consumer Inhalation. Short Term Local Effects 859.7 mg/m3
Industry Inhalation. Short Term Local Effects 960 mg/m3
PNEC
Freshwater 0.18 mg/l
Marinewater 0.018 mg/l
Intermittent release 0.36 mg/l
STP 35.6 mg/l
Sediment (Freshwater) 0.981 mg/kg
Sediment (Marinewater) 0.0981 mg/kg
Soil 0.0903 mg/kg
8.2. Exposure controls
Process conditions
Use engineering controls to reduce air contamination to permissible exposure level. Provide eyewash station.
Engineering measures
Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit
is not exceeded.
Respiratory equipment
No specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended
occupational exposure limit. It is recommended to use respiratory equipment with combination filter, type A2/Р2.
Hand protection
Protective gloves should be used if there is a risk of direct contact or splash. The most suitable glove must be chosen in
consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. Use protective
gloves made of: Butyl rubber. Nitrile.
Eye protection
Wear approved chemical safety goggles where eye exposure is reasonably probable. EN166
Other Protection
Wear suitable protective clothing as protection against splashing or contamination.
Hygiene measures
DO NOT SMOKE IN WORK AREA! Wash hands at the end of each work shift and before eating, smoking and using the
toilet. Wash promptly with soap & water if skin becomes contaminated. When using do not eat, drink or smoke.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance
Liquid
Colour
Red.
Odour
Characteristic.
Viscosity
600-800 cP @ 20 °c (68 F)
Flash point (°C)
3.3 (37.94 F) CC (Closed cup).
9.2. Other information
8
4
/