Datasheet
Page 1
DFL
Dry Film Lubricant
DFL is a white, dry-film lubricant, for use where mineral oils or silicones are not suitable. It is also suitable for
use as an anti-stick and mould release agent or where products of the highest purity are required. The film will
not contaminate, migrate or pick up dust and dirt particles.
• Dry film lubricant; clean and non-oily
• Suitable for use on wood, plastic, fibre, metal, glass, etc.; testing advised
• Water repellent and chemically inert; suitable for a wide number of applications
• This product conforms with MIL-L-60326 (MU & MU Amendment 1)
Approvals
RoHS-2 Compliant (2011/65/EU): Yes
Typical Properties
Colour White Translucent Fluid
Density (g/ml) 1.58
Temperature Range (°C) -200 to +260
Mean Particle Size 5 microns
Molecular Weight 3700
Coefficient Of Friction 0.04
Softening Point (ASTM E-28-58T (°C)) 265
Melting Point (Crystalline) (°C) 300
4 Ball Wear (mm) 2.568
Weld Load (kgf) 126
Description Packing Order Code Shelf Life
Dry Film Lubricant 200ml aerosol DFL200D 48 months
Directions for Use
Shake can to ensure good dispersion of ingredients and spray on to the surface to be treated from a distance of
4" to 6". When using as a release agent apply a number of thin coats rather than one thick coat to avoid
cracking.


