Datasheet

Page 1

CTG

Contact Treatment Grease

CTG contact lubricant offers excellent electrical and mechanical properties under the conditions required by

today’s automotive and domestic equipment industries. It has been specifically designed to lubricate a variety of

switches used in the automotive market and provides a very high level of protection from corrosion. CTG has

excellent materials compatibility however, as in all applications; it is recommended that compatibility tests are

carried out on sensitive materials, particularly thermoplastics, prior to large scale application.

 Excellent corrosion protection and oxidation stability; good protection in harsh environments

 Excellent plastics compatibility; suitable with sensitive plastics (ABS/PC), testing is always advised

 Produces low and constant mV drop and contact resistance; ensures reliability of the contact

 Enhances quality of switch; provides smooth operation and extends switch lifetime

Approvals

RoHS-2 Compliant (2011/65/EU):

Yes

Typical Properties

Colour

Cream

Density (g/ml)

0.85

Temperature Range (°C)

-50 to +160

Evaporation Weight Loss (% 7 days @ 125°C)

1.6%

Copper Strip Corrosion (IP154 / ISO 2160)

≤1b

Drop Point (IP32 / ISO 2176 (°C))

>200

Cone Penetration Un-Worked (ASTM D 217 @ 20°C)

325

Cone Penetration Worked (ASTM D217, 60 strokes @ 20°C)

330

Consistency (NLGI)

Bleed / Separation (IP121)

<5%

Silver Corrosion (DIN 51759, 3 hrs @100°C)

No change

Packing Product Code Order Code Shelf Life Container Dimension

20kg Bulk CTG20K ECTG20K 72 months 305mm (Diameter) x 406mm (Height)

35ml Syringe CTG35SL ECTG35SL 48 months N/A

PAGE 1
Page 1 CTG Contact Treatment Grease CTG contact lubricant offers excellent electrical and mechanical properties under the conditions required by today’s automotive and domestic equipment industries. It has been specifically designed to lubricate a variety of switches used in the automotive market and provides a very high level of protection from corrosion.
PAGE 2
Page 2 Directions for Use Before final treatment with Electrolube lubricants, contact surfaces should be clean and dry. For general removal of dirt, Electrolube Ultrasolve is recommended. Hardened dirt and tarnish, especially on larger contacts, should be removed by rubbing with an abrasive material, which can be impregnated with the lubricant to be used. After cleaning non-wiping contacts, loosened tarnish should be removed before a final application of lubricant is made.