Datasheet

Revision date: 05/06/2017 Revision: 0
Clear Protective Lacquer
General information See Section 11 for additional information on health hazards. The severity of the symptoms
described will vary dependent on the concentration and the length of exposure.
Inhalation A single exposure may cause the following adverse effects: Headache. Nausea, vomiting.
Central nervous system depression. Drowsiness, dizziness, disorientation, vertigo. Narcotic
effect.
Ingestion May cause sensitisation or allergic reactions in sensitive individuals. Due to the physical
nature of this product, it is unlikely that ingestion will occur.
Skin contact May cause skin sensitisation or allergic reactions in sensitive individuals. Repeated exposure
may cause skin dryness or cracking.
Eye contact Irritating to eyes.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically. May cause sensitisation or allergic reactions in sensitive individuals.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media The product is flammable. Extinguish with alcohol-resistant foam, carbon dioxide, dry powder
or water fog. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
5.2. Special hazards arising from the substance or mixture
Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up.
Bursting aerosol containers may be propelled from a fire at high speed. If aerosol cans are
ruptured, care should be taken due to the rapid escape of the pressurised contents and
propellant. Vapours may form explosive mixtures with air.
Hazardous combustion
products
Thermal decomposition or combustion products may include the following substances:
Harmful gases or vapours.
5.3. Advice for firefighters
Protective actions during
firefighting
Avoid breathing fire gases or vapours. Evacuate area. Keep upwind to avoid inhalation of
gases, vapours, fumes and smoke. Ventilate closed spaces before entering them. Cool
containers exposed to heat with water spray and remove them from the fire area if it can be
done without risk. Cool containers exposed to flames with water until well after the fire is out.
If a leak or spill has not ignited, use water spray to disperse vapours and protect men stopping
the leak. Control run-off water by containing and keeping it out of sewers and watercourses. If
risk of water pollution occurs, notify appropriate authorities.
Special protective equipment
for firefighters
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
clothing. Firefighter's clothing conforming to European standard EN469 (including helmets,
protective boots and gloves) will provide a basic level of protection for chemical incidents.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
4/
15