Service manual

Wells-Garnder Color Vector Monitor Guide
Page 73 of 73
CAP KIT SUMMARY:
Parts you need to buy in addition to the Zanen cap kit.
Summary: Parts you need to buy in addition to the Zanen cap kit
Quantity Description Location
(1) LV2000 board (http://www.geocities.com/jeffhendrix67/lv2000/)
(1)* NTE50 (do not buy if you are installing an LV2000) Q101
(2) NTE49 (or MPSU07 (NTE188)) if the heavier duty NTE49 can not
be found)
Q604, Q704
(1) 3.9 ohm ½ watt resistor R903
(2) 3.9 ohm 3 watt resistor R901, R907
(1) 22 ohm 3 watt resistor R106
(1) 1.3k ohm 5 watt resistor R701
(1) 2.2 ohm 3 watt resistor R926
(1) 4.7k ohm ¼ watt resistor R911
(1) 6.8k ohm ¼ watt resistor R910
(2)* 5.6k ohm ¼ watt resistor (only needed for revision P327 or P339
Deflection board; not needed if you have revision P314)
R812, R813
(4) 1 mfd 50v radial capacitor C800-C803
(2) 220 uF 50v radial capacitor C901, C902
(2) 4700 uF 50v radial capacitor C100, C101
(4) 1N4007 (NTE125) rectifier diode D100-D103
(2) 6.25 amp slo-blo fuse F100, F101
* these parts may be optional for your monitor.
Here are some good parts places to get the big transistors (and other things):
Allied Electronics; +1.800.433.5700; www.alliedelec.com
Digi-Key; +1.800.344.4539; www.digikey.com
Mouser Electronics; +1.800.346.6873; www.mouser.com
Newark Electronics; +1.708.495.7740; www.newark.com
Circuit Specialists; +1.800.528.1417; www.web-tronics.com
Here are a few surplus type places that have great prices on things like electrolytic capacitors:
All Electronics; +1.818.904.0524; www.allelectronics.com
BG Micro; +1.972.205.9447; www.bgmicro.com
Marlin P. Jones; +1.407.848.8236; www.mpja.com
HSC Electronic Supply; +1.408.732.1573; www.halted.com
END