Installation Guide

Fixed the wallbox

Section 2: Wi-Fi Configuration

For Ethernet configuration steps, please refer to the user manual;

For WIFI configuration, please follow the below steps

(Or refer the video instruction on the website: WWW.ELECTRO-VOLT.COM)

A．Restart the charger

B．Turn on your phone’s WIFI function

C. Find the charger’s hot spot with name”EVSE-XXXXXXXX” (XXXXXXXX means the

last 8 pile number, for example “EVSE-82555964”), and connect it (no password). (If

you don’t find the hot spot with name “EVSE-XXXXXXXX”, please restart the charger).

Show in fig- 2.1

Fig. 2.1

D．Turn your phone’s browser on and fill the address “http://192.168.4.1”