EVS-40A-UL AC Level 2 EV Charger Quick User Guide 1
Section 1-- Charger Installation A professional electrician to install EVS-40A-UL for you is needed. Please follow the installation steps and warnings on the user manual strictly. Make sure the wall socket is NEMA 14-50 (See Fig. 1). Please follow the instructions below to finish the installation. (Same installation steps for the empty socket or you can refer Fig. 1.
Fixed the wallbox Section 2: Wi-Fi Configuration For Ethernet configuration steps, please refer to the user manual; For WIFI configuration, please follow the below steps (Or refer the video instruction on the website: WWW.ELECTRO-VOLT.COM) A．Restart the charger B．Turn on your phone’s WIFI function C. Find the charger’s hot spot with name”EVSE-XXXXXXXX” (XXXXXXXX means the last 8 pile number, for example “EVSE-82555964”), and connect it (no password).
E．Fill the default password “12345678”. Show in fig 2.2. Fig 2.2 F．Set your router WiFi name and password, show in Fig 2.3. Fig 2.3 G．Save and restart the charger. Section 3: Connect the EV Charger to APP 1.
2. Quick guide 3. After registration of APP, click the upper button on the left (See Fig-3.1); 4. Scan the QR Code (located on product) to add your charging station. (See Fig-3.2) Fig 3.1 Fig 3.
5. Start charging For Service and Support Tel: +1-248-825-3562 Email: SUPPORT@ELECTRO-VOLT.COM Website: WWW.ELECTRO-VOLT.COM Facebook: www.facebook.com/electrovoltllc Instagram: www.instagram.com/electrovoltllc LinkedIn:www.linkedin.
