System information
X-Array Touring Loudspeaker Systems – Applications Notes – Page 19
New Haven NH32102-2 Fitting: The New Haven NH32102-2 swivel-ring, double-stud fitting recom-
mended for attachment to both the front and rear X-Array rigging track is available for the user to make
custom rigging attachment hardware. ATM Fly-ware, 2100 S. Wilmington Ave., Carson, CA 90810
USA, 310-834-5914 or Sound Manufacturing Inc., 3336 Primera Ave., Hollywood, CA 90068 USA, 213-
850-5042.
Custom Rigging Straps: Custom wire-rope rigging strap assemblies that use the New Haven NH32102-
2 fitting may be ordered. ATM Fly-ware, 2100 S. Wilmington Ave., Carson, CA 90810 USA, 310-834-
5914 or Sound Manufacturing Inc., 3336 Primera Ave., Hollywood, CA 90068 USA, 213-850-5042.
General Rigging Supplies: A wide variety of standard and specialty rigging hardware components for
both touring and permanent-installation applications is available. ATM Fly-ware, 2100 S. Wilmington
Ave., Carson, CA 90810 USA, 310-834-5914 or Sound Manufacturing Inc., 3336 Primera Ave., Holly-
wood, CA 90068 USA, 213-850-5042.
B.2 Electronic Accessories
Klark Teknik DN8000 Digital Controller: The DN8000 digital electronic loudspeaker controller has a
two-in/five-out architecture, with each output having programmable high-pass & low-pass filters, four-
band equalization, signal delay, compressor, limiter and noise gate functions. Program parameters for
optimal performance of the X-Array™ systems are available. Klark Teknik, Klark Industrial Park, Walter
Nash Road, Kidderminster, Worcestershire DY11 7HJ England, 44-156274-1515.
Electro-Voice Dx34A Digital Controller: The Dx34A digital electronic loudspeaker controller has a two-
in/four-out architecture, with each output having programmable high-pass & low-pass filters, two- or
three-band equalization, signal delay and limiter functions. Program parameters for optimal performance
of the X-Array™ systems are available. Electro-Voice, 600 Cecil St., Buchanan, MI 49107 USA, 616-695-
6831.
Electro-Voice Power Amplifiers: The stereo P3000 power amplifiers are rated at 850 watts into 8 ohms
(93 volts rms short term, 132 volts peak) and are 3-U high and weigh 28 kg (62 lb) each. The stereo
P2000 power amplifiers are rated at 560 watts into 8 ohms (75 volts rms short term, 106 volts peak) and
are 3-U high and weigh 26 kg (57 lb) each. The stereo P1200 power amplifiers are rated at 370 watts
into 8 ohms (66 volts rms short term, 93 volts peak) and are 2-U high and weigh 16 kg (36 lb) each.
Electro-Voice, 600 Cecil St., Buchanan, MI 49107 USA, 616-695-6831.
X-Array Amplifier Racks: These 16-U racks will hold four Electro-Voice P3000 power amplifiers, one
Klark Teknik DN8000 digital controller, 1-U light module, and a 2-U multi-pin patch panel. The aluminum-
frame/wood-panel racks are vibration-isolation mounted on heavy-duty wheel boards and come prewired
for AC power, audio and control signal sends and Neutrik Speakon
®
speaker connectors. db Sound, L.P.,
1219 Rand Road, Des Plaines, IL 60016 USA, 847-299-0357.
X-Array Speaker Cables: Eight conductor cable with four #11 AWG conductors and four #13 AWG
connectors. The larger conductors are used in the LF bands for increased damping factor. Lengths made
to order. Standard terminations are Neutrik Speakon
®
NL8FC connectors wired to X-Array standards;
however, custom terminations are available. Entertainment Technology Cable, 1247 Rand Road, Des
Plaines, IL 60016 USA, 800-529-6312.
B.3 Miscellaneous Accessories
X-Array Loudspeaker Covers: Heavy-duty covers are available for the X-Array speakers. These
covers wrap around the enclosures, while sitting on a dolly, and Velcro together at the back for fast in-
stallation and removal. db Sound, L.P., 1219 Rand Road, Des Plaines, IL 60016 USA, 847-299-0357.
X-Array Dolly Boards: Double-wide dolly built to hold four X-Array™ loudspeakers, two wide by two
high. The double-thick 18-mm birch-plywood construction includes cutouts and keys for loudspeaker en-
closure shape and alignment feet. The dolly boards are painted black and utilize four extra-heavy-duty 4"
x 2" casters. Custom-designed dolly boards are also available to meet specific requirements. R&R Cases
and Enclosures, 1217 Rand Road, Des Plaines, IL 60016 USA, 847-299-8100.
Racks and Road Cases: A variety of general-purpose and custom racks and hard-shell road cases are
available for touring or permanent-installation applications. R&R Cases and Enclosures, 1217 Rand
Road, Des Plaines, IL 60016 USA, 847-299-8100.