User`s manual

5
SECTION 2 – QuickBUILD

SOFTWARE
INSTALLATION
___________________________________
Minimum Computer Requirements for Running QuickBUILD


An IBM
compatible computer with an 80486 DX2 66 (or higher) processor,
running Microsoft Windows 95 (or higher) operator system.

8 MB of ram.

5 MB of available hard drive space.

3.5 high-density disk drive.

Monitor resolution of 640x480, 256 colors.

A mouse or other pointing device supported by Windows .

Communications port with 16550 UART recommended. (Required for VUE-
IT

software only. Not necessary for QuickBUILD

by itself.)
Installing QuickBUILD

on Your Computer
As previously mentioned, QuickBUILD

is a 32 bit application and can only
be run on a Windows
95 (or higher) operating system.

Close all programs before installing QuickBUILD software.

Insert the QuickBUILD installation disk in your 3.5-inch floppy drive.

From the Windows
95 desktop, click Start.

Select Run from the Start menu.

Type A:\setup.exe.

Click the “OK” button.

Follow the QuickBUILD

software installation instructions as they appear on
the screen.