User`s manual

28
If you try to perform the “Save” or “Save As” function and there are resource
errors, you will see the following warning screen:
Figure 36.
You will need to correct these errors before you can properly save your design.
Note: The QuickBUILD

software will allow you to save your design to file
with errors in the design. This allows you to suspend work on a design and
reopen it later.
Wiring Errors
It can be very easy to forget to wire a device, especially if the devices are placed
close together. Occasionally you may want to check the QMap Information
window. If there are unwired inputs, they will show up in the “Path Delays”
section:
Figure 37.