User`s manual

25
Wiring the Combiner (Mixer) Device
To wire Combiner (Mixer) devices, follow the same instructions given in the
previous chapter, Wiring the Selector (Router) Device.
Meter Dialog Window
QuickBUILD

will automatically assign output meters in ascending alphanumeric
order. (2a, 2b, 3a, 3b etc.) These meters will appear in the VUE-IT

software
from left to right. If desired, you can reassign the order of these meters from the
“Meter” button in the “Components” menu. The dialog window looks like this:
Figure 31.
When this dialog window is open, the outputs are labeled on the screen. To
reassign these, click the “ReOrder” button. The numbers to the right of each
output (in the center window of the dialog box) will disappear. To create a new
order, click the output you want the first meter to represent. Then click the output
you want the second meter to be. Continue this procedure until all outputs have
been reassigned. Then click “OK”. The meters will now appear in that order when
you are working with this QuickMAP

in the VUE-IT

software.