User`s manual

23
Wiring the Selector (Router) Device
A Selector (or Router) device allows you to “select” an audio source, for a given
destination path, from multiple sources. To wire a Selector device, drag a wire
from your first source to the Selector and click your left mouse button. You will
then see a menu requesting which input to the Selector you are wiring:
Figure 28.
In this case you will choose “Input #1”. Repeat this procedure for your second
input source going to Select Switch 1, but this time choose “Input #2”. Continue
this procedure for the rest of the input sources making sure you select the correct
input number. (QuickBUILD

will not let you wire two sources to the same input.)
Your Screen will then look like this:
Figure 29.